A smooth, water-borne, very low VOC epoxy coating system with an abrasion resistant satin finish for interior floors. Also ideal for walls and ceilings, especially in wet rooms.
Do you have any questions? Call:
+48 717 026 346
A smooth, water-borne, very low VOC epoxy coating system with an abrasion resistant satin finish for interior floors. Also ideal for walls and ceilings, especially in wet rooms.
1. Concrete base
2. Priming with Acqua Primer
Neopox® W Plus base layer
4. Closing layer Neopox® in Plus
| Construction of the Neopox® system in Plus C-1.5S AP and approximate consumption | ||
| Layer | Product | Wear |
|
Priming* |
Acqua Primer |
120-160 g/ |
|
Seal coating |
Neopox® W Plus |
350 g/ |
*An alternative primer from Neotex can be used, after consultation with our Technical Advisor.
Acqua Primer - a highly hard and abrasion-resistant epoxy primer for use on floors and walls. For stabilizing old floors and as a primer for sealants.
Neopox® W Plus - an easy-to-clean epoxy coating that is used on floors and walls in factories, food production and processing plants, slaughterhouses, breweries, vineyards, etc. The product is water-soluble, contains no solvents (0% VOC) and benzyl alcohol. Recommended for use wherever solvent vapors are undesirable. The coating is resistant to water, alkalis, detergents, diluted acids and solvents.
It is worth additionally protecting the floor with varnish, e.g. Neodur Varnish W :
Neodur® Varnish W Gloss or W Satine - Two-component, colorless, solvent-based polyurethane varnish for protecting floors. Hardened with aliphatic polyisocyanate, thanks to which it has excellent resistance to UV radiation and can also be used outdoors. It does not turn yellow or lose its shine, even after many years. Neodur Varnish polyurethane floor varnish has high chemical and mechanical resistance (diluted acids, alkalis) and very good adhesion (also to difficult substrates such as polyester). Perfect for protecting all types of floors, both concrete and those already covered with floor paints. It provides the floor with an aesthetic and durable colorless finish, protecting it against scratching and loss of color.
Do you have any questions? We will help you choose the perfect product to use.
Call:
+48 717 026 346
150 μm
Smooth *, colorful, satin
gloss (60 °): 62
*Mild extruded finish "orange peel"
LD/MD (low/medium load)
B FL - S1
78 mg (Taber Test, CS 10/1000/1000)
≥2.5 N/mm²
Pass, 180 ° bend, 1/8 'mandrel
5 N (Elcometer 3092)
Class and
<0.1kg/ m2 h 0.5
-30°C min. / +70°C max.
Let us know what you need and we will even match products to your project on the same day.
Need advice?
We will choose the right solution
Highly hard and abrasion-resistant epoxy primer for use on floors and walls. For stabilizing old floors and as a primer for sealants.
Varnish for protecting resin, concrete, microcement and brick floors. Resistant to UV radiation - does not turn yellow. Available in three types of finish: Matt, Satine and Gloss.
Epoxy coating for use on floors and walls, as well as for covering mineral substrates or repainting tiles. It can be used in food processing plants.
A smooth, water-borne, very low VOC epoxy coating system with an abrasion resistant satin finish for interior floors. Also ideal for walls and ceilings, especially in wet rooms.
Get a discount for your company by talking to an advisor.
See other products from this category
Anti-slip coating system with abrasion-resistant aliphatic polyurethane finish with high UV resistance, for outdoor and indoor floors.
Anti-slip, solvent-free, multi-coat epoxy system with a durable finish, ideal for indoor industrial floors.
Anti-slip, solvent-free, self-leveling epoxy system with a durable finish, ideal for indoor industrial floors exposed to high mechanical and chemical stress.
Thick-layer flooring system with an intermediate layer of full-grain colored flakes and a glossy or satin topcoat. For decorative resin floors, ideal for garages.
Anti-slip, solvent-free, multi-layer epoxy system with a durable finish and high impact resistance. Ideal for indoor applications exposed to high mechanical and chemical loads. Also suitable for ramps.
Smooth, solvent-free epoxy coating system for interior industrial floors.
Smooth, solvent-free, self-leveling epoxy system for interior industrial floors exposed to high mechanical and chemical loads.
An anti-slip multi-layer system in which the finishing layer is durable aliphatic polyurethane with high resistance to UV radiation. This system is ideal for outdoor and indoor industrial floors and ramps.
How to finish the garage floor? Systems based on thin-film resins that can be applied at home
Resin flooring systems - ready-made solutions for industry and beyond
Proven products
Here you will find products with high strength and technical parameters. Thanks to this, you can enjoy long-lasting effects.
Help in choosing
Are you wondering which products will be best for your needs? Call us - we will advise you and choose the right solution.
Contractor support
Do you need help with construction work? Let us know and we will recommend proven contractors.
Stationary points
Do you want to collect the products in person? Or maybe you prefer to talk live? Visit our branch in: Warsaw, Wrocław, Katowice or Gdańsk.
Wholesale orders
Are you looking for systems and products for investment? Send your phone number. We will call you back with an offer including an investment discount.
Anti-corrosion
Fire retardant
Resin floors
Roofs
Tanks and swimming pools
Terraces and balconies
Hygienic paints
Facades and interiors
Accessories
Call:
+48 717 026 346