NEOPOX SF PLUS solvent-free epoxy flooring

Neopox SF PLUS, a solvent-free epoxy flooring product, is particularly recommended for protecting surfaces requiring the highest mechanical and chemical resistance. Such areas certainly include floors in laboratories, factories, industrial halls, and warehouses.

Standard colours RAL7035, RAL7040, RAL9003.

Upon request, we can tint the product to your chosen colour - please contact us for more information.

Neopox SF PLUS is a two-component product based on selected resins and solvent-free hardeners. It exhibits excellent abrasion and yellowing resistance, as well as exceptional mechanical and chemical resistance (to alkalis, diluted acids, water, oils, and solvents; see the chemical resistance table in the product data sheet). The coating's high mechanical resistance results from the ability to apply the epoxy in thick layers – a single layer can reach a dry thickness of up to 190 microns when applied by roller.

Solvent-free epoxy flooring Neopox SF PLUS application:

• laboratories,
• industrial halls, garages,
• warehouses,
• factories, slaughterhouses, hospitals, schools,
• parking lots.

Solvent-free epoxy flooring Neopox SF PLUS properties:

• two-component product (base + hardener),
• high chemical resistance,
• high mechanical resistance (application in thick layers),
• low-odor product - does not contain solvents,
• simple application with a roller,
• thermal resistance range from -30 °C to +100 °C ,
• the possibility of obtaining an anti-slip coating by pouring wet sand over the first layer of resin,
• coating finish: gloss,
• has a PZH certificate.

Systemic primers:

DRY, POROUS CONCRETE: application of Epoxol Primer, usually in one layer, diluted with Neotex 1021 in the amount of 10-15% or Epoxol Primer SF-P (solvent-free epoxy primer).

FRESH OR DAMP CONCRETE: Neopox Primer WS epoxy primer . The concrete must be at least 2 weeks old. Causes of damp substrate: rainfall, frequent cleaning, and inability to completely dry the substrate.

CONCRETE RISING MOISTURE BY CAPILLARY FROM THE GROUND/INCORRECTLY EXECUTED INSULATION : Neopox Primer AY.

ANHYDRIT, SCREED, OTHER HIGHLY ABSORBENT FLOORING SCREEDS: Use Epoxol Primer diluted 10-15% with Neotex 1021 . Anhydrite or screed are poor quality substrates with high absorption capacity, therefore the primer consumption may be higher than indicated in the technical data sheet.

TILES, GLOSS POLISHED CONCRETE: in the case of non-absorbent substrates, use the Super Spoiwo RO3333 .

When using epoxy primers, the concrete should have a uniform sheen after proper priming. If dull spots appear, this indicates the substrate is highly absorbent and priming should be repeated.

Conditions during application of Neopox SF Plus:

• minimum temperature during application 12°C,
• the substrate temperature must be at least 3°C ​​above the dew point to avoid the risk of condensation on the surface,
• apply immediately after mixing the two components to avoid polymerization of the product in the container,
• Before application, the substrate must be properly prepared: cleaned and primed.
• Repainting of a freshly painted surface should be done within 48 hours, otherwise the surface must be sanded to avoid problems with adhesion of the second coat.

Low-odor resin

Are you looking for maximum resistance to mechanical and chemical factors in your floor? Solvent-free epoxy paint , available from our range, is perfect for this purpose. Available in two colors – light and dark gray – these products create a durable, high-gloss coating that's easy to keep clean. Find out what sets these products apart and why we recommend them for the most demanding projects!

Odorless epoxy coating - characteristics

The paint's lack of solvents means no irritating odors are released during application. The coating is easily applied with a roller, and for a non-slip effect, simply sprinkle the first, still-wet coat with sand.

• The high gloss looks extremely aesthetically pleasing, and the smooth surface is easy to clean and does not allow dirt to adhere.
• High-build epoxy paint – applied in thick layers – ensures high mechanical resistance.
• Thermal resistance is from -30°C to +100°C.
• Advantages during application: you can apply two layers “at once” by applying the material with a squeegee.

Solvent-free epoxy paint – perfect for industrial facilities!

This low-odor resin is suitable for applications where resistance to external factors is crucial. It can be used in production halls, warehouses, garages, and parking lots, as well as in factories, slaughterhouses, and educational and medical facilities. Want to learn more? Check out our blog or contact us, and we'll do our best to provide you with the information you need.