Neopox® Pool C-1.5s EP - gelcoat/polyester - swimming pool system
An epoxy coating system with UV filters, high resistance to chlorination chemicals and increased resistance to chalking, ideal for swimming pools.

Key features:
- Dry film thickness: ~~150 microns
- Smooth gloss finish
- Increased resistance to chalking
- Great resistance to chlorinating agents
- Excellent resistance to impact and mechanical stress
- Extraordinary durability
Certificates:
- CE
- UV resistance (after applying varnish)
| Structure of the Neopox® Pool C-1.5s EP gelcoat/polyester and approximate consumption* |
| Layer |
Product |
Wear |
|
Priming*
|
Epoxol® Primer
|
120-160 g/m2 in one layer
|
|
Protective layers
|
Neopox® Pool
|
250-330 g/m2 in two layers using a roller
|
* Before application, the substrate must be structurally sound, free from cracks, blisters, or signs of delamination. Any damage or defects must be repaired before proceeding. The surface should be cleaned with an alkaline detergent to remove organic contaminants and then rinsed thoroughly. Limescale and mineral deposits should be removed with a suitable acidic agent and rinsed again. Degreasing with a suitable solvent, such as MEK or acetone, is required to remove any paraffin or wax residue that could reduce adhesion. After drying, the entire surface should be evenly sanded with P80–P120 sandpaper.
Epoxol® Primer – a solvent-based epoxy primer for epoxy paints and polyurethane resins. For use on floors and walls where high mechanical and chemical resistance is required.
Neopox® Pool - A two-component epoxy paint for concrete, metal, and polyester pools, as well as reservoirs and fountains. Resistant to water, chemicals, UV radiation, chlorine, and temperature.