Home

Single-component, quick-drying road paint for horizontal marking of concrete, asphalt, paving stones - traffic permitted after 11 minutes . Highly resistant to abrasion - necessary in warehouses, garages and parking lots. Bandax road strip and line paint has Institute of Hygiene Certificate and the National Certificate of Conformity.

Provides anti-corrosion, cathodic protection of steel. For application to small surfaces, filling gaps and repair work. Leaves an aesthetic finish.  

A spray that leaves a coating with the sparkling appearance of stainless steel. Provides thermal protection up to 100°C. The coating is mechanically, chemically and UV resistant.  

Anti-corrosion spray primers for painting small surfaces or corrections. Can be used on steel with slight corrosion. Contains no lead or chromate.

Primer for use on small surfaces for filling gaps or finishing work. Can be used as a finishing layer. For slightly corrosive environments.  

Two-component epoxy paint for concrete, metal and polyester swimming pools, as well as for tanks and fountains. Resistant to water and chemicals, as well as UV radiation, chlorine and temperature. Waterproofing pool coating that perfectly seals the substrate and prevents water seepage.

Epoxy resin for use as a primer or construction resin. A solvent-free product for priming walls and floors and creating the so-called epoxy screeds.  

Solvent-free, epoxy primer strengthening cement substrates. For internal and external use.

Reinforcing primer for sealing and stabilizing the substrate. For new and old surfaces.

Semi-matt primer enamel that can be applied independently with a roller or brush. Available in various colors.  

Chemical-resistant epoxy for painting tanks, swimming pools, sewage treatment plants. For steel and concrete substrates. You can pour water over it after 30 minutes.

Polyurethane varnish for walls and floors. Protects concrete, brick and resins. Available in two types of finish: glossy and semi-matt. Resistant to UV rays.  

Polyurethane wall varnish. Protects concrete and brick. Available in three finishes: gloss and semi-matte.

Fast-drying industrial primer enamel. Available in many colors, does not require priming and contains anti-corrosion pigments.  

Thinner for Teluria anti-corrosion and floor paints.

Thinner for Bandax road paint and Vernis Bandax varnish.

Quick-drying metallic zinc that provides cathodic protection and a metallic finish. Contains zinc and aluminum pigment. Highly resistant and easy to apply.  

Polyvinyl paint for painting steel, cast iron, aluminum, plaster and concrete. It meets the requirements of the Regulation of the Minister of Economy and is certified by the National Institute of Hygiene, allowing it to be used in welding plants. Eliminates harmful optical radiation.  

Alkyd topcoat available in several types of finish. For indoor and outdoor use. Perfect for creating surface layers, including: on wood and concrete.

Alkyd primer recommended for painting large surfaces, e.g. containers. Does not run on the edges. Excellent grip.  

Primer enamel for industrial use. Protects against rust in environments up to corrosion class C3. Many colors to choose from.   

One-component primer enamel protecting against rust in environments with corrosivity class up to C3. Many color versions.  

Industrial polyvinyl primer enamel for indoor and outdoor use on steel structures, tin roofs, etc.

Epoxy primer for steel. It protects against corrosion and has high chemical resistance.  

Industrial epoxy primer. It protects against corrosion and has excellent adhesion to metals and galvanized substrates.

Industrial epoxy primer. It does not require priming and does not drip from vertical surfaces. For steel, mineral and galvanized surfaces.  

High gloss epoxy enamel. For use as a topcoat in internal anti-corrosion systems. Highly resistant mechanically and chemically.

Industrial high-gloss polyurethane enamel. It can be applied by spraying. Highly chemical and mechanical resistant.

Industrial enamel for use as a surface layer of anti-corrosion systems. It dries quickly and is highly resistant to chemicals and weather conditions.

Primer for steel and cast iron surfaces. It can be used for temporary anti-corrosion protection, e.g. during storage.  

Primer based on alkyd resin with silicone providing anti-corrosion protection and high temperature resistance.

Polyaspartic/polyurea flooring resin enabling the application of the entire system within 8 hours. Provides a coating with high mechanical resistance. Possibility of application at lower temperatures, even down to -10°C .

Systemic primer for use under the Neodur Fast Track polyurea/polyaspartic flooring resin. Can be applied at low temperatures, even down to -10°C. It allows the surface to be applied just 3 hours after applying the primer (at +25°C).

Two-component waterproofing membrane for application to smooth substrates. Rain-resistant just 2 hours after application . Creates a coating resistant to moisture and mechanical damage. Perfect for roofs, balconies and terraces.

Two-component, solvent-based flooring resin, perfect for industrial applications. Creates coatings that are highly resistant mechanically and chemically. It is easy to clean and dirt does not adhere to it.

Solvent-based epoxy primer for epoxy paints, polyurethane resins. For use on floors and walls where high mechanical and chemical resistance is required.  

Polyurethane resin resistant to UV radiation and other atmospheric factors. Provides high mechanical and chemical resistance.  

Heat-resistant anti-corrosion paint for steel and aluminum substrates. Resistant to high temperatures, up to 500°C.

Polyaspartic resin providing a waterproofing effect and aesthetics on terraces and balconies. Resistant to weather conditions and UV radiation.  

System thinner for NEOTEX epoxy products.

Chemically resistant epoxy resin for covering tanks requiring protection against aggressive chemical agents. It can be used in shafts, sewage tanks, water treatment plants, etc.

Heat-resistant topcoat based on resin, which provides high temperature resistance up to 200°C.

Topcoat enamel for painting containers. It has very good resistance to weather conditions, dries quickly and does not streak.

UV-resistant resin for creating putty and filling gaps in concrete and marble.

Primer for epoxy, acrylic and polyurethane topcoats. Durable in changing weather conditions, constant contact with water and industrial atmosphere. Provides anti-corrosion protection and excellent adhesion.

For marking floors and surfaces with low traffic. A product with excellent adhesion and durability.

The lowest price of TRACING spray for the matte line, 750 ml, which was valid for 30 days before the introduction of the discount: PLN 55.35 gross.

Line spray in high traffic areas. For marking surfaces and optimizing road traffic indoors and outdoors.

Acrylic varnish with a glossy finish. Can be applied as a topcoat. It can be mixed with paints from the Bandax range.

One-component polyurethane resin for use as a sealing layer on floors. It can be used outdoors because it is resistant to UV radiation.  

A two-component, cold-applied polyurea waterproofing membrane for roofs, terraces or balconies. Rain-resistant after 1 hour of application. Prevents moisture absorption and seals. Resistant to UV radiation and mechanical damage.

Neoproof Polyurea R has a European Technical Assessment (ETA 24/1247) and is classified in the highest durability category W3 according to EAD 030350-00-0402, which confirms an expected service life of up to 25 years.

Neoproof Polyurea R liquid roofing membrane is root resistant (according to CEN/TS 14416:2014 ) and certified for external fire resistance according to EN 13501-5 . Polyurea R is classified as Broof (t1) and has certified Cool Roof properties (Cool Material ).

Polyurethane anti-corrosion aluminum paint for steel, metal or concrete. Can be applied at low temperatures (-18°C) and high humidity (up to 99%) - practically at any time of the year, regardless of weather conditions. For anti-corrosion protection and painting of bridges, steel structures, roofs, steel pipes, etc.

A set consisting of sealing compound with crack-bridging fibers, a brush and reinforcing non-woven fabric. Perfect for immediately sealing roofs even in bad weather.  

Two-component polyurethane paint for concrete, metal and polyester , as well as for tanks and ponds. Can be dyed in many colors from the RAL and NCS palette. Highly resistant to swimming pool chemicals, UV radiation and temperature fluctuations. Perfectly seals the substrate.

Matte polyurethane coating for external and internal floors, as well as for protecting steel structures.

Anti-slip, solvent-free, multi-layer epoxy system with a durable finish and high impact resistance. Ideal for indoor applications exposed to high mechanical and chemical loads. Also suitable for ramps.

Mass for express roof sealing. You can apply even in bad weather. High flexibility and excellent adhesion to various substrates.

Sealing compound with crack-bridging fibers. Perfect for immediately sealing roofs even in bad weather.  

A decorative, coating floor system with an intermediate layer of colorful petals with a rare or full charges and a shiny or satin surface layer. Ideal for garages, corridors and low -load surfaces.