Anti-corrosion
Fire retardant
Resin floors
Roofs
Tanks and swimming pools
Terraces and balconies
Hygienic paints
Facades and interiors
Accessories
Call:
+48 717 026 346
From PLN 3.30
Order in bulk with free advice
Get a discount for your company by talking to an advisor.
1-1.5 l/m2 for one layer
- Wroclaw,
- Katowice,
- Warsaw,
- Gdańsk,
- Poznań
- +48 717 026 345
Technical Documentation
FILLCOAT FIBRES fiber-reinforced sealing compound
Manufacturer:
Rust-Oleum
Sealing compound with crack-bridging fibers. Perfect for immediately sealing roofs even in bad weather.
FILLCOAT FIBRES fiber-reinforced sealing compound
Fillcoat Fibers sealing compound is an immediate seal for roofs, flashings, gutters, etc. It contains fibers that bridge cracks. Quick and easy sealing even in bad weather.
If there are no visible cracks on the substrate, you can use Fillcoat without fibers (it is easier to spread).
The product is available in two colors and packages with a capacity of 5l and 1l.
Also check out the ready-made repair kit - with a brush and reinforcing fabric for quick repairs.
Sealing compound with Fillcoat Fibers – properties:
- Immediate sealing of leaks
- contains fiber that bridges cracks up to 2 mm
- can be applied in all weather conditions (except snow)
- 1300% flexibility and excellent adhesion to various substrates
- does not contain bitumen in its composition
- good resistance to acid rain
Application
You can apply the product to various types of surfaces, including:
- bituminous surfaces,
- Galvanized surfaces,
- Hard PVC,
- Polyester,
- Aluminum,
- Glass,
- Roof tiles.
Substrate preparation
Before applying Fillcoat Fibers, the substrate must be properly prepared. To do this, remove dirt, grease, mud, leaves and other contaminants. Then, the areas to be repaired should be thoroughly cleaned with a hard brush and washed with a sponge.
Specification
Wear
Packaging available
5 years old
Paint base
Solvent-based
Dust-free
4 hours
Recommended painting accessories
Related products
Technical Documentation
Are you wondering about which products to choose?
Let us know what you need and we will even match products to your project on the same day.
Need advice?
We will choose the right solutionChoose accessories
Sealing compound with crack-bridging fibers. Perfect for immediately sealing roofs even in bad weather.
+48 717 026 346
Customers also bought with this product
-
A two-component, cold-applied polyurea waterproofing membrane for roofs, terraces or balconies. Rain-resistant after 1 hour of application. Prevents moisture absorption and seals. Resistant to UV radiation and mechanical damage.
Neoproof Polyurea R liquid roofing membrane is root resistant (according to CEN/TS 14416:2014 ) and certified for external fire resistance according to EN 13501-5 . Polyurea R is classified as Broof (t1) and has certified Cool Roof properties (Cool Material ).
From PLN 407.17 -
- NOTE: WATER-BASED PRODUCT. Choose temperature-controlled shipping to receive the product on the declared date, regardless of the weather. Standard shipments may be held due to temperatures below 5°C along the delivery route.
Primer for preparing surfaces for painting with waterproof systems. Ensures long-term durability and tightness of the surface.
From PLN 480.06 -
For sealing joints and gaps in various substrates, as well as expansion joints and joints.
From PLN 35.76 -
Strengthens waterproofing membranes. For pasting in vertical-horizontal joints and for connecting various types of substrates before applying the membrane, e.g. roofing felt to metal.
From PLN 6.64 -
An easy-to-use preparation intended for repairing demanding surfaces. Protects cracks and fills small holes by creating a protective rubber layer. To be repainted with latex or oil paint.
From PLN 148.99 -
- NOTE: WATER-BASED PRODUCT. Choose temperature-controlled shipping to receive the product on the declared date, regardless of the weather. Standard shipments may be held due to temperatures below 5°C along the delivery route.
One-component roof waterproofing for cold application. Recommended for roofs covered with felt , concrete flat roofs and metal roofs. Resistant to UV and mechanical loads. It creates a smooth, uniform waterproofing coating without joints, resistant to a wide temperature range from -40°C to +80°C . It has sun-reflecting and "cool roof" properties confirmed by the Cool Material certificate (white color).
From PLN 187.50 -
Mass for express roof sealing. You can apply even in bad weather. High flexibility and excellent adhesion to various substrates.
From PLN 136.94 -
Strengthens waterproofing membranes. For pasting in vertical-horizontal joints and for connecting various types of substrates before applying the membrane, e.g. roofing felt to metal.
From PLN 5.99
See other products from this category
-
- NOTE: WATER-BASED PRODUCT. Choose temperature-controlled shipping to receive the product on the declared date, regardless of the weather. Standard shipments may be held due to temperatures below 5°C along the delivery route.
For cleaning concrete, roof tiles and metal before applying paint coatings. Requires rinsing with water.
From PLN 27.06 -
- NOTE: WATER-BASED PRODUCT. Choose temperature-controlled shipping to receive the product on the declared date, regardless of the weather. Standard shipments may be held due to temperatures below 5°C along the delivery route.
Easy to apply, effective fungicide. Removes fungi and molds from both slightly and heavily damp walls.
From PLN 16.24 -
- NOTE: WATER-BASED PRODUCT. Choose temperature-controlled shipping to receive the product on the declared date, regardless of the weather. Standard shipments may be held due to temperatures below 5°C along the delivery route.
Durable and waterproof paint for painting cement roof tiles and other concrete structural elements. It protects painted elements well against weather conditions.
From PLN 167.16 -
A set consisting of sealing compound with crack-bridging fibers, a brush and reinforcing non-woven fabric. Perfect for immediately sealing roofs even in bad weather.
From PLN 232.81 -
- NOTE: WATER-BASED PRODUCT. Choose temperature-controlled shipping to receive the product on the declared date, regardless of the weather. Standard shipments may be held due to temperatures below 5°C along the delivery route.
Primer improving adhesion to the substrate. It does not interfere with the "breathing" process of mineral substrates. For indoor and outdoor use.
From PLN 18.20 -
For sealing joints and gaps in various substrates, as well as expansion joints and joints.
From PLN 35.76 -
Putty for joints and gaps. It works together with the substrate, is resistant to weather conditions and can be repainted. Recommended for flexible roof coatings.
From PLN 52.90 -
Mass for express roof sealing. You can apply even in bad weather. High flexibility and excellent adhesion to various substrates.
From PLN 136.94
Related articles
How to protect your balcony in case of bad weather?
Protecting external surfaces with resins during bad weather may be problematic. The vast majority...
read more
Renovation of a flat roof made of tar paper. metal, PVC/EPDM or PUR foam
Maintaining the roof in appropriate technical condition to enable the above functions to be performed is essential...
read more
Waterproofing of industrial halls - roofs
Industrial halls, due to their purpose, require special care and attention to their condition...
read more
Proven products
Here you will find products with high strength and technical parameters. Thanks to this, you can enjoy long-lasting effects.
Help in choosing
Are you wondering which products will be best for your needs? Call us - we will advise you and choose the right solution.
Contractor support
Do you need help with construction work? Let us know and we will recommend proven contractors.
Stationary points
Do you want to collect the products in person? Or maybe you prefer to talk live? Visit our branch in: Warsaw, Wrocław, Katowice or Gdańsk.
Wholesale orders
Are you looking for systems and products for investment? Send your phone number. We will call you back with an offer including an investment discount.
