TRkenPOX ACCELERS Single -component accelerator for hardening epoxy resins

Trkenpox Accelerator is an accelerating hardening and working time of epoxy resins, which significantly affects the shortening of the entire process of work with resin -based preparations. Thanks to the carefully selected composition of the ingredients, it shortens the length of work by up to several days, which translates directly into the financial benefits and shorter duration of the implementation. It can be used at low temperatures, at which it also works very effectively. It is recommended to use it only as an accession to epoxy land , as it can cause fragility or loss of gloss of the topcoat resin.

Properties and advantages

• Shortening of curing time : it significantly reduces the time needed to harden epoxy resins, which allows faster completion of work. Standard epoxy lands that require 24 hours to be covered again, with the addition of Trkenpox Accelerator require only 6 hours at a temperature of +16 ° C!
• The versatility of use : compatible with various epoxy systems, which makes it a universal solution in many applications. Ideally suited to epoxy floor land.
• Ease of use : simple to dispense and mix. Only weight is required for the correct application to measure the appropriate amount of Trkenpox Accelerator .

Application

• Acceleration of hardening : Ideal for flooring, where the key factor is time, as in the case of repairs, supplementing defects or priming the floor using epoxy resin. Significantly reduces the duration of work.
• Low temperatures : effective in conditions of reduced temperatures, where standard epoxy resins hardened more slowly. It allows the surface to pre -harde the surface made of epoxy resin in +16 ° C after 6 hours!

Preparation and application

• Dosage : The recommended amount of add -on is a certain percentage of epoxy resin mass. The 10% of the B component should be measured, i.e. the hardener to the finished epoxy resin mixture (base and hardener).
• Mixing : Trkenpox Accelerator should be thoroughly mixed with the resin after adding the hardener to ensure the homogeneity of the mixture. For this purpose, it is recommended to mix the whole for about 2-3 minutes with a dollar stirrer.
• Application : After adding a hardener, the mixture should be applied immediately as recommended for a given epoxy system. It is worth remembering that adding Trkenpox Accelerator not only accelerates the process of hardening resin, but also shortens the life of the mixture. Therefore, the whole prepared material should be used as soon as possible.