TELPUR S 210 polyurethane primer

Telpur S 210 is a quick-drying polyurethane primer for industrial applications. Available in small sets of 2.2 kg in the full range of colors according to RAL. It does not require the use of a separate primer - it contains anti-corrosion pigments (zinc phosphate). Semi-matte finish.

Primer and topcoat in one Telpur S 210

Telpur S 210 is available in a semi-matt version, a set of 2.2 kg and 11 kg. The price and package size refer to the set (base + hardener). Sample prices and colors to choose from are visible on the website. If you need a different color according to the RAL palette, contact us at biuro@trokentech.pl , we will quote it for you. You can check the RAL color sample here . RAL9006 and RAL9007 are metallic colors (light and dark aluminum). The color is each time dyed specifically to the customer's order, therefore we do not send this product on delivery. When summarizing the order, you can pay via PayU or traditional transfer.

Telpur S 210 - properties and application

The coating is resistant to weather conditions, yellowing, moisture and mechanical factors. The paint can be used as a primer or as an anti-corrosion polyurethane primer under a suitable topcoat (e.g. under Telpur T 320 ).

• excellent adhesion to steel and galvanized surfaces and aluminum,
• very quick drying,
• 2-in-1 product - contains anti-corrosion pigments, so it does not require priming,
• does not flow from vertical surfaces - thixotropic.

Can be used outdoors and indoors, in areas with medium to high corrosion load, such as chemical factories, industrial zones. Also for painting machines, pipes and steel structures, advertising elements.

Theoretical performance

Drying time

Mixing proportions

The paint is a two-component product. The ingredients - base and hardener - must be mixed together before painting, maintaining the proportions. Hardening proportions: Telpur S 210 base - 10 parts by weight: Telhard PUR hardener - 1 part by weight. The paint and hardener mixture should be used within 3 hours (20°C)

Substrate preparation

• For C3 and C4 corrosive environments, the substrate must be blast cleaned to Sa 2 ½.
• For a C1 corrosive environment, the substrate must be clean, dry and free from grease and rust, mechanically cleaned to St 2 - St 3.
• Galvanized surfaces should be cleaned with water with ammonia or water with detergent.
• Previously painted surfaces should be removed, cleaned and degreased.
• For cleaning the substrate, we recommend a water solution of Emulsol RN-1 .
• Neodur Metalforce rust remover 24 hours before painting .

Painting

• Apply 1-2 layers of Telpur S 210 paint so that the dry layer thickness is at least 120µm when dry.
• If necessary, apply an additional layer or layers after 24 hours of drying the previous layer, or after 20 minutes in the so-called "wet on wet" system.

We recommend using a systemic thinner .