More and more often, when planning new investments, investors and contractors are looking for high-quality products that have a wide range of applications, are easy to apply and guarantee durable protection of the roof coating for many years. Our products fit perfectly here.
In this category you will find liquid roofing membranes, perfect for various types of roofs.
Liquid roofing membrane on felt – the benefits of their use
By choosinga liquidroofing , you can save time and money. Below you will find some examples that should convince you to choose liquid roofing membranes for roof waterproofing :
when renovating the roof, there is no need to remove the old roofing felt - thanks to this, you will not waste time on dismantling the old coating and will avoid costly disposal,
our products are applied without the use of fire - thanks to this you will avoid dangers that could arise when applying the roofing felt,
our liquid membranes will not burden the entire roof surface as much as another layer of bituminous felt,
our roof waterproofing systems create a seamless, hydrophobic coating - no more roof leaks.
Why is it worth using liquid roofing membranes over felt instead of another layer of felt?
The most important properties of roof membranes
provide reliable protection of the roof against leaks,
lower the temperature of the roof and attic,
create seamless coatings that are impermeable to water and moisture,
they are easy to apply, they can be applied with a roller, brush or airless spray,
they are characterized by high flexibility (the membrane works with the substrate).
We will help you choose the right waterproofing system that will meet your expectations. Our liquid roofing membranes will pass the test regardless of whether you need to protect a large roof with an area of over 1,000 m2 or the roof of a small single-family house. More information about the mentioned membranes and their technical data sheets can be found on the pages of individual products.
Durability of roof membranes
The roofing membranes we offer for roof waterproofing allow you to create a highly resistant and durable surface. Liquid roofing membranes create a smooth and uniform coating, thus properly sealing and preventing the ingress of water and moisture.
The liquid waterproofing membranes in our offer are based on resins,among others : polyurethane and polyurea. Both polyurethane and polyurea membranes are characterized by high mechanical resistance, resistance to weather conditions and resistance to UV radiation. Due to their properties, resins are often used in industry to protect roofs, but also floor surfaces, e.g. in warehouses.
Membranes for every type of roof
Roof membranes available in our offer can be applied to various types of surfaces. We can apply them to substrates such as roofing felt, shingles, concrete, sheet metal, PVC membrane and PUR foam. They are perfect for flat and sloping roofs. Liquid roofing membranes are widely used in modern construction and during the renovation of old roof coatings. Before application, however, we must properly prepare the substrate - it must first be cleaned and, in some cases, also primed.
What can I use instead of roofing felt for a flat roof?
Traditional roofing felt is one of the most popular ways to cover a flat roof. Liquid roofing membranes are an excellent alternative to traditional roofing felt, especially when it comes to flat roofs.They are more durable, easier to apply and provide excellent protection against weather conditions.When choosing a roof material, it is worth considering modern solutions that can contribute to extending the life of the roof and increasing its resistance to external factors.
It is worth remembering that flat roofs are exposed to water stagnation, which collects on the surface of the felt and can cause leaks and leaks in the roof.The uniform, smooth surface of liquid roofing membranesseals the roof and ensures resistance to water stagnation- that is why membranes are one of the most effective methods of protecting roofs.
You can use liquid waterproofing membranes on concrete, metal, and alsoon old and damaged roofing felt- without having to remove it.
Roof prepared for photovoltaics
Are you planning to install a photovoltaic system on your roof? Remember that the roof should be properly prepared before installing such a system. If you have a roof covered with felt, nothing stops you from taking proper care of its surface! With the help of roofing membranes, you will not only easily seal your roof, but also take care of its aesthetic appearance and, most importantly, you will receive a coating that reflects UV rays and light! Roofs made of tar paper heat up quickly when exposed to strong light, which means that photovoltaics on an improperly prepared roof do not achieve their maximum efficiency.
Thanks to the membranes, you will create a bright coating that will increase the efficiency of the installed photovoltaic system and prevent the house from heating up inside.
Liquid waterproofing membranes can be classified according to the polymers used in their production. This has a direct impact on their properties. All of the types of roof membranes listed below provide effective protection against moisture. They are fully resistant to standing water and UV radiation. Our membranes are characterized by extraordinary flexibility and mechanical resistance.
Polyurea:
Neoproof Polyurea R is an extremely durable liquid polyurea waterproofing membrane. Mainly used on roofs covered with felt. Easy to apply, it can be applied to roofing felt without priming. Two-component product. The coating becomes resistant to rain just 1 hour after application.
The minimum shelf life is 20 years.
Neoproof Polyurea C1 is the second of our two-component polyurea roof waterproofing membranes. It is mainly used on PUR foam, concrete and sheet metal. Possible application in one (thick) layer - then the product is applied using hydrodynamic spray. Rain may fall on the coating 2 hours after application.
The minimum shelf life is 20 years.
Polyurethane:
Neoproof PU W-40 is our one-component liquid roofing membrane. Created on the basis of polyurethane resin. Thanks to its composition, the product is user- and environment-friendly. Before application, the substrate should be primed with Revinex . Application by brush, roller or airless spray.
The minimum shelf life is 11 years.
Acrylic:
Neoroof is our hybrid liquid membrane for sealing roofs. One-component and water-soluble product. The white color version is certified to reflect sunlight (it reflects as much as 88%, which allows you to reduce the roof temperature by 40%).
The minimum shelf life is 10 years.
We encourage you to check out our offer of liquid roofing membranes! Take care of your roof using high-quality products - gain many years of durability and protection.
A two-component, cold-applied polyurea waterproofing membrane for roofs, terraces or balconies. Rain-resistant after 1 hour of application. Prevents moisture absorption and seals. Resistant to UV radiation and mechanical damage.
Neoproof Polyurea R liquid roofing membrane is root resistant (according to CEN/TS 14416:2014 ) and certified for external fire resistance according to EN 13501-5 . Polyurea R is classified as Broof (t1) and has certified Cool Roof properties (Cool Material ).
Two-component waterproofing membrane for application to smooth substrates. Rain-resistant just 2 hours after application . Creates a coating resistant to moisture and mechanical damage. Perfect for roofs, balconies and terraces.
NOTE: WATER-BASED PRODUCT. Choose temperature-controlled shipping to receive the product on the declared date, regardless of the weather. Standard shipments may be held due to temperatures below 5°C along the delivery route.
NOTE: WATER-BASED PRODUCT. Choose temperature-controlled shipping to receive the product on the declared date, regardless of the weather. Standard shipments may be held due to temperatures below 5°C along the delivery route.
Liquid roof waterproofing membrane cured with UV radiation. It can be used on all types of roof coverings, including roofing felt . The white coating perfectly reflects sunlight (as much as 88%) and reduces the temperature on the roof by up to 40% . Provides full sealing and resistance to weather conditions.
NOTE: WATER-BASED PRODUCT. Choose temperature-controlled shipping to receive the product on the declared date, regardless of the weather. Standard shipments may be held due to temperatures below 5°C along the delivery route.
One-component roof waterproofing for cold application. Recommended for roofs covered with felt , concrete flat roofs and metal roofs. Resistant to UV and mechanical loads. It creates a smooth, uniform waterproofing coating without joints, resistant to a wide temperature range from -40°C to +80°C . It has sun-reflecting and "cool roof" properties confirmed by the Cool Material certificate (white color).
NOTE: WATER-BASED PRODUCT. Choose temperature-controlled shipping to receive the product on the declared date, regardless of the weather. Standard shipments may be held due to temperatures below 5°C along the delivery route.
NOTE: WATER-BASED PRODUCT. Choose temperature-controlled shipping to receive the product on the declared date, regardless of the weather. Standard shipments may be held due to temperatures below 5°C along the delivery route.
One-component preparation for pitched roofs. It creates a flexible, waterproof coating and ensures exceptional durability and resistance, among others. to UV radiation.
Anti-corrosion
Fire retardant
Resin floors
Roofs
Tanks and swimming pools
Terraces and balconies
Hygiene
Walls
Accessories
Call:
