NEOTEX PU JOINT polyurethane sealant

Two-component epoxy paint for concrete, metal and polyester swimming pools, as well as for tanks and fountains. Resistant to water and chemicals, as well as UV radiation, chlorine and temperature. Waterproofing pool coating that perfectly seals the substrate and prevents water seepage.

A two-component, cold-applied polyurea waterproofing membrane for roofs, terraces or balconies. Rain-resistant after 1 hour of application. Prevents moisture absorption and seals. Resistant to UV radiation and mechanical damage.

Neoproof Polyurea R has a European Technical Assessment (ETA 24/1247) and is classified in the highest durability category W3 according to EAD 030350-00-0402, which confirms an expected service life of up to 25 years.

Neoproof Polyurea R liquid roofing membrane is root resistant (according to CEN/TS 14416:2014 ) and certified for external fire resistance according to EN 13501-5 . Polyurea R is classified as Broof (t1) and has certified Cool Roof properties (Cool Material ).

Systemic diluent for Neotex polyurethane and polyurea products. 

Two-component putty for a wide range of applications. Depending on the mixing ratio of the ingredients, you can obtain a flexible, hard or very hard mass. Recommended for metal, concrete, wood and ceramics. Also for car and yacht repairs.  

Provides very high chemical and mechanical resistance. Possibility of applying the resin in thick layers - up to 190 microns in one layer.

One-component polyurethane resin for use as a sealing layer on floors. It can be used outdoors because it is resistant to UV radiation.  

Trken Floor Fast Special is a thick -hexis, quickly hardening, self -leveling epoxy resin, which is intended for industrial applications and decorative projects that require a perfectly smooth surface. The product provides the possibility of applying 1 to even 15 mm of resin in one layer. It is characterized by very low emission of volatile organic compounds (LZO), thanks to which it is practically odorless.

Mass for filling holes, gluing and repairing floors and walls. It allows sanding and repainting within 2 hours after application.  

Two-component putty for a wide range of applications. Depending on the mixing ratio of the ingredients, you can obtain a flexible, hard or very hard mass. Recommended for metal, concrete, wood and ceramics. Also for car and yacht repairs.  

UV-resistant resin for creating putty and filling gaps in concrete and marble.

Two-component, water-soluble putty for leveling surfaces and filling gaps. Designed for plaster, concrete and stone.

Putty for filling small holes or gaps on larger surfaces. It has greater plasticity than Epoxol Putty. Depending on the mixing ratio, three degrees of mass elasticity can be obtained.

Troken CBL is a corrosion-inhibited, polymer-modified, fine-grained cement-based repair mortar. Dedicated to anti-corrosion protection of exposed reinforcement and creating an adhesive layer during concrete and reinforced concrete repairs, also in prestressed and dynamic systems. For indoor and outdoor use.

Troken FCM is a polymer-modified cement-based repair mortar. Dedicated to leveling surfaces and repairing defects, among others. in concrete or reinforced concrete, also in prestressed and dynamic systems. For indoor and outdoor use.