NEOPROOF PU W-40 polyurethane liquid roof waterproofing membrane

Neoproof PU W-40 polyurethane roof membrane is a waterproofing coating for roofs covered with felt, used when the highest mechanical strength and exceptional waterproof properties are required. Creates a membrane impermeable to moisture, resistant to UV and mechanical loads. There is no need to remove the old roofing felt and the costs associated with tearing and disposal - just apply a flexible membrane to the felt, which creates a homogeneous coating without any joints.

The Neoproof PU W-40 waterproofing roof membrane has certified "cool roof" properties (Cool Material).

Neoproof PU W-40 roof waterproofing membrane - scope of applications:

• Roofs covered with felt , metal roofs, concrete roofs, cement tiles,
• Roof coverings where high resistance to standing water is required,
• Metal surfaces after applying an appropriate primer,
• On top of new or old, acrylic or polyurethane waterproofing coatings,
• On closed-cell PUR foam insulation to protect against UV radiation and water and on Styrofoam

Neoproof PU W-40 polyurethane waterproofing membrane - properties/advantages:

• An excellent solution for securing flat roofs, including those that are walked on,
• High mechanical strength,
• Resistance to water stagnation - excellent waterproofing,
• Saving money and time - no need to tear off the old roofing felt,
• The resulting coating does not have any joints,
• Resistance to ultraviolet radiation and unfavorable weather conditions,
• Can be applied in cloudy weather (hardens by evaporation, does not require UV radiation),
• Remains flexible in a wide temperature range from -40°C to +80°C ,
• Minimum ambient temperature during application 10°C,
• Environmentally and user-friendly (one-component water-based product),
• Easy application (apply with a roller).

Neoproof PU W-40 polyurethane roof membrane - other applications:

• Concrete roofs
• Metal roofs

Certificates/Test Reports:

• CE certified according to EN 1504-2
• ENo certificate of conformity. 1922-CPR-0386
• Cool roofing material certified by the University of Athens
• Assessment of optical properties by National and Kapodistrian University of Athens - Physics Dept.
• Test report by external independent quality control laboratory Geoterra (No. 2018-891)
• Certified resistance to external fire according to EN 13501-5. Broof system classification (t1) based on the Νο classification report. D/4/1/2022 according to EN 13501-5 and test report no. 61/22/103/1/D-1/OENV conducted in accordance with CEN/TS 1187 by an external independent laboratory Łukasiewicz IMBiGS.
• Meets LEED v4.1 requirements: SS Credit - Heat Island Reduction - Option 1 - High Reflective Roof, Initial SRI ≥ 82
• Meets the requirements for VOC content in accordance with EU Directive 2004/42/CE

System primers depending on the type of substrate:

• PAPA, CONCRETE, CLOSED-CELL PU FOAM, STYROFOAM - the substrate should be primed with Revinex diluted with water in the ratio Revinex: water = 1: 4, in order to close the pores, improve the properties of the substrate, better adhesion and higher efficiency.
• BLACK STEEL - the substrate should be primed with Neotex Metal Primer . Neodur Metalforce rust remover 4-6 hours (+25°C) before priming .
• GALVANIZED STEEL AND NON-FERROUS METALS - the substrate should be primed with Neotex Inox Primer or Vinyfix Primer .
• POLISHED CONCRETE (GLOSS, NON-ABSORBENT SUBSTRATES) - the substrate should be primed with Super Binder RO3333.

All the above-mentioned primers should be used in accordance with their technical data sheets. If there are cracks larger than 1.5 mm on the surface or if we want to extend the durability of our coating, it can be reinforced with Neotextile . Jointex flexible acrylic mass .

Liquid polyurethane roofing membrane

If you need effective roof waterproofing , a liquid membrane will work perfectly. You can use it on roofs covered with felt, metal roofs, concrete flat roofs and cement tiles. This is a great solution for surfaces exposed to standing water - the created coating is seamless and does not allow moisture to pass through. Check out the characteristics of liquid polyurethane membranes and find out where they are worth using!

Liquid membranes for roofing felt made of felt – the most important properties

By choosing liquid roofing membranes , you gain:

• seamless coating resistant to water stagnation,
• resistance to UV radiation and atmospheric factors,
• possibility of application in cloudy weather - UV rays are not needed for hardening, as it takes place by evaporation,
• ease of application – the liquid roofing membrane is applied with a roller,
• no need to tear off the old roofing felt - you save on disposal costs! 

Where will you use the liquid outer membrane?

The offered liquid roofing felt membrane will also work well on metal roofs - after using an appropriate primer, roofs covered with ceramic tiles and concrete roofs. You can also use it for waterproofing closed-cell PUR foam and polystyrene.

Liquid polyurethane membrane – use it in your project!

the liquid roof membrane is also mechanically durable. It is a single-component water-based product - safe for the environment and easy to apply.

Comparison of liquid waterproofing coatings in the Trokentech offer