Anti-corrosion
Fire retardant
Resin floors
Roofs
Tanks and swimming pools
Terraces and balconies
Hygienic paints
Facades and interiors
Accessories
Call:
From PLN 49.20
Order in bulk with free advice
Get a discount for your company by talking to an advisor.
- Wroclaw,
- Katowice,
- Warsaw,
- Gdańsk
- +48 717 026 346
Technical Documentation
Neopox® in Plus Flake - garage system
Manufacturer:
Neotex
A decorative, coating floor based on water with an intermediate layer of colored petals with a rare or full flow and a shiny or satin surface layer. Ideal for garages, corridors and low -load surfaces.
- Home DIY
- Garage
- Utility room
- Basement
- Inside
- Epoxy
- Gloss
- Decorative
- Color
- Satin
- Light/Medium Duty (LD/MD)
- Low VOC content
- R9
Do you have any questions? Call:
+48 717 026 346
Neopox® in Plus Flake - garage system
Neopox® in Plus SB/FB Flake - floor system
A decorative, coating floor based on water with an intermediate layer of colored petals with a rare or full flow and a shiny or satin surface layer. Ideal for garages, corridors and low -load surfaces.
System diagram:
1. Concrete base
2. Priming with Acqua Primer
3. SERVICE Layer - NEOPOX® base layer in Plus
4. Sprinkle with decorative flakes
Neodur® Varnish W Gloss or Satine sealing layer
The Neopox® system in Plus SB/FB Flake is ideal for:
- garages
- utility rooms
- basements
- corridors
Certificates:
- CE
- LEED
Key features:
- dry film thickness: ≥150microns
- for floors with low and medium loads
- unique aesthetic effect thanks to a glossy or satin finish
- water-based product - limited unpleasant odor
- abrasion and scratch resistant
- very good resistance to tire marks
- suitable for use in the food industry
- LEED compliance in terms of VOC emissions (for Neodur® Varnish Satine)
Gray RAL7035 is ready - standard. Other colors are each time dyed specifically at the customer's order, so we do not send this product on delivery. When summarizing the order, it is possible to pay via PayU or by traditional transfer. Are you looking for a different RAL color ? Contact us!
| Construction of the Neopox® system in Plus SB/FB Flake and approximate consumption | ||
| Layer | Product | Wear |
|
Priming* |
Acqua Primer |
120-160 g/ |
|
Support layer - base layer |
Neopox® W Plus |
~ 3500 g/ |
|
Cover with decorative flakes |
Colorful decorative flakes (medium, black: gray: white - 1/3: 1/3: 1/3) |
SB : ~ 80 g/ Fb: ~ 300 g/ |
|
Sealing layer |
Neodur® Varnish In Gloss or In Satine |
Satine: ~ 250 g/ Gloss: ~ 250 g/ |
*An alternative primer from Neotex can be used, after consultation with our Technical Advisor.
Each set consists of:
Acqua Primer - a highly hard and abrasion-resistant epoxy primer for use on floors and walls. For stabilizing old floors and as a primer for sealants.
Neopox® W Plus - an easy-to-clean epoxy coating that is used on floors and walls in factories, food production and processing plants, slaughterhouses, breweries, vineyards, etc. The product is water-soluble, contains no solvents (0% VOC) and benzyl alcohol. Recommended for use wherever solvent vapors are undesirable. The coating is resistant to water, alkalis, detergents, diluted acids and solvents.
Neodur® Varnish W Gloss or W Satine - Two-component, colorless, solvent-based polyurethane varnish for protecting floors. Hardened with aliphatic polyisocyanate, thanks to which it has excellent resistance to UV radiation and can also be used outdoors. It does not turn yellow or lose its shine, even after many years. Neodur Varnish polyurethane floor varnish has high chemical and mechanical resistance (diluted acids, alkalis) and very good adhesion (also to difficult substrates such as polyester). Perfect for protecting all types of floors, both concrete and those already covered with floor paints. It provides the floor with an aesthetic and durable colorless finish, protecting it against scratching and loss of color.
Decorative petals - for use on resin floors improve the appearance of the floor and mask unevenness and imperfections of the ground. Flakes can be used both inside on epoxy floors and outside on polyurethane floors. Ideal for use in both garages and basements or terraces. The flakes are scattered on wet paint, thanks to which they stick to the coating. After the paint has dried, the residue of the petals should be vacuumed.
A set of necessary tools:
- 5 velor rollers 18cm
- Roller handles 18cm
- 5 velor rollers 10cm
- handles for the roller 10cm
- Telescopic stick 80-120cm
and allows for a comprehensive application on the surface up to 20m 2 or 40 m 2 .
Full application instructions for download - a rare SB backfill and full fb backflow .
Floors made in the Neopox® system in Plus Fb/SB Flake:
.jpg)
How to properly prepare the ingredients of the base (A) system - hardener (b)?
|
Prim 10m2 Acqua® Primer |
Load -layer 10m2 Neopox® W Plus |
Sealing layer 10m2 Neodur® Varnish in Gloss |
Sealing layer 10m2 Neodur® Varnish at Satine |
|
|
We suggest dividing the area working for smaller parts e.g. 10m2 - the weight of the ingredients at 10m2 for individual layers. Last 2 columns respectively with a choice of gloss |
A - 1,142 kg B - 0.457 kg Thinner/water - none - a non -diced product Remember! The ground will not complete Costs in the floor! After priming, use Supplements of concrete defects.
|
water -borne product
First layer Second |
water -borne product
First layer: Second layer: |
water -borne product
First layer: Second layer: |
Application of a resin floor in an underground garage:
Do you have any questions? We will help you choose the perfect product to use.
Call:
+48 717 026 346
Technical Documentation
Are you wondering about which products to choose?
Let us know what you need and we will even match products to your project on the same day.
Need advice?
We will choose the right solutionRecommended for this product
-
-
- NOTE: WATER-BASED PRODUCT. Choose temperature-controlled shipping to receive the product on the declared date, regardless of the weather. Standard shipments may be held due to temperatures below 5°C along the delivery route.
Highly hard and abrasion-resistant epoxy primer for use on floors and walls. For stabilizing old floors and as a primer for sealants.
From PLN 403.03 -
- NOTE: WATER-BASED PRODUCT. Choose temperature-controlled shipping to receive the product on the declared date, regardless of the weather. Standard shipments may be held due to temperatures below 5°C along the delivery route.
Varnish for protecting resin, concrete, microcement and brick floors. Resistant to UV radiation - does not turn yellow. Available in three types of finish: Matt, Satine and Gloss.
From PLN 100.61 -
- NOTE: WATER-BASED PRODUCT. Choose temperature-controlled shipping to receive the product on the declared date, regardless of the weather. Standard shipments may be held due to temperatures below 5°C along the delivery route.
Epoxy coating for use on floors and walls, as well as for covering mineral substrates or repainting tiles. It can be used in food processing plants.
From PLN 301.66
A decorative, coating floor based on water with an intermediate layer of colored petals with a rare or full flow and a shiny or satin surface layer. Ideal for garages, corridors and low -load surfaces.
+48 717 026 346
See other products from this category
-
Matte polyurethane coating for external and internal floors, as well as for protecting steel structures.
From PLN 452.18 -
Trken Floor Protect 3in1 is a two -component, environmentally friendly epoxy resin based on water. Thanks to specially selected components, as one product has three uses. It can be used as an epoxy soil, a leveling mass, as well as a smooth surface layer. Trken Floor Protect 3in1 is based on epoxy resin resistant to oil, lubricant, fuel and other chemicals. Low LZO content allows the use of a product in garages, industrial halls as well as residential buildings and public facilities.
From PLN 771.46 -
Two-component, solvent-based flooring resin, perfect for industrial applications. Creates coatings that are highly resistant mechanically and chemically. It is easy to clean and dirt does not adhere to it.
From PLN 125.42 -
Kryptanate 100 LV is a two-component, quick-drying polyaspartic system with low viscosity and excellent chemical resistance, suitable for manual application. This transparent resin is perfect for sealing resin coatings.
From PLN 909.07 -
Polyurethane resin resistant to UV radiation and other atmospheric factors. Provides high mechanical and chemical resistance.
From PLN 371.76 -
Solvent-free, high-build polyurea/polyaspartic resin. The entire system (primer + two layers of resin) within 9 hours (at 25°C). It can also be applied at low temperatures, even down to -10°C .
From PLN 522.45 -
Trken Floor Fast Special is a thick -hexis, quickly hardening, self -leveling epoxy resin, which is intended for industrial applications and decorative projects that require a perfectly smooth surface. The product provides the possibility of applying 1 to even 15 mm of resin in one layer. It is characterized by very low emission of volatile organic compounds (LZO), thanks to which it is practically odorless.
From PLN 1,063.77 -
- NOTE: WATER-BASED PRODUCT. Choose temperature-controlled shipping to receive the product on the declared date, regardless of the weather. Standard shipments may be held due to temperatures below 5°C along the delivery route.
Ecological paint for painting floors, concrete elements, wooden floors and plastered surfaces. The surface painted with eco-Farpos paint is abrasion-resistant and non-slip.
From PLN 52.75
Related articles
How to finish the garage floor? Systems based on thin-film resins that can be applied at home
How to protect the surface in the garage or utility room to make the process quick, easy and satisfactory...
read more
Concrete paint for exterior use
Are you looking for a product to paint concrete? Concrete paints are an ideal solution for people who want to protect or...
read more
Maintenance and cleaning of resin floors
Resin coatings are an extremely practical and popular solution because they offer a number of benefits, such as...
read more
Resin flooring systems - ready-made solutions for industry and beyond
Flooring systems, specially designed for light, medium and heavy loads. Our solutions are perfectly...
read more
Advantages and disadvantages of resin floors at home
Everything about resin floors in an apartment or house: advantages, disadvantages, renovation. Discover the solutions!
read more
Proven products
Here you will find products with high strength and technical parameters. Thanks to this, you can enjoy long-lasting effects.
Help in choosing
Are you wondering which products will be best for your needs? Call us - we will advise you and choose the right solution.
Contractor support
Do you need help with construction work? Let us know and we will recommend proven contractors.
Stationary points
Do you want to collect the products in person? Or maybe you prefer to talk live? Visit our branch in: Warsaw, Wrocław, Katowice or Gdańsk.
Wholesale orders
Are you looking for systems and products for investment? Send your phone number. We will call you back with an offer including an investment discount.
