A smooth, fast-curing, solvent-free aliphatic polyurea self-leveling system with an abrasion-resistant finish with high UV resistance for exterior and interior industrial floors.
Do you have any questions? Call:
+48 717 026 346
A smooth, fast-curing, solvent-free aliphatic polyurea self-leveling system with an abrasion-resistant finish with high UV resistance for exterior and interior industrial floors.
1. Concrete base
2. Priming:
inside : Neodur® Primer SF
Outside : Neopox® Primer WS
Neodur® Fast Track SF carrier layer
| Construction of the Neodur® Fast Track SF SL-5s NdP system and approximate consumption | ||
| Layer | Product | Wear |
|
Priming* |
inside: Neodur® Primer SF |
120-150 g/ |
|
outside: Neodur® Primer SF |
600 g/ |
|
|
Supporting layer |
Neodur® Fast Track SF |
~600 g/ |
*An alternative primer from Neotex can be used, after consultation with our Technical Advisor.
Neodur® Primer SF – a fast-drying, solvent-free hybrid primer (polyurethane-polyurea). It allows for subsequent topcoats to be applied in just 3 hours, significantly reducing working time (compared to standard epoxy primers requiring a 24-hour break). It is solvent-free, therefore low-odor and suitable for indoor use.
Neopox® Primer WS - epoxy primer for use on damp concrete floors (factories, laboratories, warehouses, supermarkets, garages, hospitals, schools, etc.). Also for strengthening cement substrates. Note - if the cause of substrate moisture is capillary action from the ground, then Neopox Primer AY .
Neodur® Fast Track SF – a high-build, solvent-free floor coating. Suitable for outdoor use, it can also be used indoors without any problems due to its solvent-free formula and low odor (the "SF" in the name stands for "solvent-free").
Do you have any questions? We will help you choose the perfect product to use.
Call:
+48 717 026 346
0.5mm
Smooth color, shiny
Gloss (60°): ≥83
MD (medium load)
75 mg (Taber Test, CS 10/1000/1000)
≥3 N/mm²
75 (Shore D)
≥4 Nm - IR4
10N (Elcometer 3092)
>35 MPa
>20 MPa
17 μm - AR0.5
-20°C min. / +80°C max.
Solvent-free, epoxy primer strengthening cement substrates. For internal and external use.
Systemic primer for use under the Neodur Fast Track polyurea/polyaspartic flooring resin. Can be applied at low temperatures, even down to -10°C. It allows the surface to be applied just 3 hours after applying the primer (at +25°C).
Solvent-free, high-build polyurea/polyaspartic resin. The entire system (primer + two layers of resin) within 9 hours (at 25°C). It can also be applied at low temperatures, even down to -10°C .
Let us know what you need and we will even match products to your project on the same day.
Need advice?
We will choose the right solution
A smooth, fast-curing, solvent-free aliphatic polyurea self-leveling system with an abrasion-resistant finish with high UV resistance for exterior and interior industrial floors.
Get a discount for your company by talking to an advisor.
See other products from this category
An anti-slip multi-layer system in which the finishing layer is durable aliphatic polyaspargine with high resistance to UV radiation. This system is ideal for outdoor and indoor industrial floors and ramps.
An anti-slip multi-layer system in which the finishing layer is durable aliphatic polyurethane with high resistance to UV radiation. This system is ideal for outdoor and indoor industrial floors and ramps.
A smooth, fast curing aliphatic polyurea coating system with an abrasion and UV resistant finish for exterior
and interior floors.
A smooth, non -release epoxy system for internal industrial floors. Perfect for car parking lots. It is also suitable for water tanks.
Anti-slip, solvent-free, self-leveling epoxy system with a durable finish. Ideal for use on internal industrial floors exposed to high mechanical and chemical loads.
Fast garage system that does not require priming, allowing in one working cycle to create a load -bearing layer and level the ground, with a top -up layer of Kryppanate 100 FLEX and a decorative finish.
Anti-slip, solvent-free epoxy coating system for interior industrial floors.
Anti-slip, solvent-free epoxy coating system for interior industrial floors.
How to finish the garage floor? Systems based on thin-film resins that can be applied at home
Resin flooring systems - ready-made solutions for industry and beyond
Proven products
Here you will find products with high strength and technical parameters. Thanks to this, you can enjoy long-lasting effects.
Help in choosing
Are you wondering which products will be best for your needs? Call us - we will advise you and choose the right solution.
Contractor support
Do you need help with construction work? Let us know and we will recommend proven contractors.
Stationary points
Do you want to collect the products in person? Or maybe you prefer to talk live? Visit our branch in: Warsaw, Wrocław, Katowice or Gdańsk.
Wholesale orders
Are you looking for systems and products for investment? Send your phone number. We will call you back with an offer including an investment discount.
Anti-corrosion
Fire retardant
Resin floors
Roofs
Tanks and swimming pools
Terraces and balconies
Hygienic paints
Facades and interiors
Accessories
Call:
 (1).png)
+48 717 026 346