Anti-slip, fast curing, solvent-free aliphatic polyurea coating system with abrasion and UV resistant finish for exterior and interior industrial floors.
Do you have any questions? Call:
+48 717 026 346
Anti-slip, fast curing, solvent-free aliphatic polyurea coating system with abrasion and UV resistant finish for exterior and interior industrial floors.
1. Concrete base
2. Priming:
inside : Neodur® Primer SF
Outside : Neopox® Primer WS
Neodur® Fast Track SF base layer
4. Backfill with quartz sand
Neodur® Fast Track SF sealing layer
| Construction of the Neodur® Fast Track SF C-10r NdP system and approximate consumption | ||
| Layer | Product | Wear |
|
Priming* |
inside: Neodur® Primer SF |
120-150 g/ |
|
Outside: Neopox® Primer WS |
600 g/ |
|
|
Base layer |
Neodur® Fast Track SF |
~300 g/ |
|
Backfill with quartz sand |
Quartz sand 0.1-0.3 (in excess) |
~3 kg/ |
|
Sealing layer |
Neodur® Fast Track SF |
~300-350 g/ |
*An alternative primer from Neotex can be used, after consultation with our Technical Advisor.
Neodur® Primer SF – a fast-drying, solvent-free hybrid primer (polyurethane-polyurea). It allows for subsequent topcoats to be applied in just 3 hours, significantly reducing working time (compared to standard epoxy primers requiring a 24-hour break). It is solvent-free, therefore low-odor and suitable for indoor use.
Neopox® Primer WS - epoxy primer for use on damp concrete floors (factories, laboratories, warehouses, supermarkets, garages, hospitals, schools, etc.). Also for strengthening cement substrates. Note - if the cause of substrate moisture is capillary action from the ground, then Neopox Primer AY .
Neodur® Fast Track SF – a high-build, solvent-free floor coating. Suitable for outdoor use, it can also be used indoors without any problems due to its solvent-free formula and low odor (the "SF" in the name stands for "solvent-free").
Quartz sand - an addition to resins that gives the surface anti-slip properties. Often used as an additive to increase their strength and hardness. Available in various sizes.
Do you have any questions? We will help you choose the perfect product to use.
Call:
+48 717 026 346
1 mm
Anti-slip - Uniformly rough (effect of dense quartz grit) - Colored
MD (medium load)
<100 mg (Taber Test, CS 10/1000/1000)
≥3 N/mm²
≥4 Nm - IR4
>35 MPa
>20 MPa
>25 PTV (Pendulum Test Value, slider 96)
Equivalent to R10
-20°C min. / +80°C max.
Epoxy resin for use as a primer or construction resin. A solvent-free product for priming walls and floors and creating the so-called epoxy screeds.
Solvent-free, epoxy primer strengthening cement substrates. For internal and external use.
Systemic primer for use under the Neodur Fast Track polyurea/polyaspartic flooring resin. Can be applied at low temperatures, even down to -10°C. It allows the surface to be applied just 3 hours after applying the primer (at +25°C).
Solvent-free, high-build polyurea/polyaspartic resin. The entire system (primer + two layers of resin) within 9 hours (at 25°C). It can also be applied at low temperatures, even down to -10°C .
Let us know what you need and we will even match products to your project on the same day.
Need advice?
We will choose the right solution
Anti-slip, fast curing, solvent-free aliphatic polyurea coating system with abrasion and UV resistant finish for exterior and interior industrial floors.
Get a discount for your company by talking to an advisor.
See other products from this category
A smooth epoxy coatings system with very low LZO emissions. Possibility of application up to 15 mm in one layer and topically up to 30 mm. Abrasion resistant finish. Designed for internal floors.
Anti-slip, solvent-free epoxy coating system for interior industrial floors.
Anti-slip, fast curing aliphatic polyurea coating system, with an abrasion resistant finish with high UV resistance, for outdoor and indoor floors.
Anti-slip water-based epoxy coating system with very low VOC emissions, with an abrasion resistant finish. Designed for indoor floors.
A decorative, coating flooring system with an interlayer of thinly colored colored flakes and a glossy or satin topcoat. Perfect for private garages, corridors and areas with low or medium loads.
Smooth, solvent-free, self-leveling system, with abrasion-resistant aliphatic polyurethane with high UV resistance, for external and internal industrial floors exposed to high mechanical and chemical loads.
Anti-slip, solvent-free, multi-layer epoxy system with a durable finish and high impact resistance. Ideal for indoor applications exposed to high mechanical and chemical loads. Also suitable for ramps.
An anti-slip multi-layer system in which the finishing layer is durable aliphatic polyaspargine with high resistance to UV radiation. This system is ideal for outdoor and indoor industrial floors and ramps.
How to finish the garage floor? Systems based on thin-film resins that can be applied at home
Resin flooring systems - ready-made solutions for industry and beyond
Proven products
Here you will find products with high strength and technical parameters. Thanks to this, you can enjoy long-lasting effects.
Help in choosing
Are you wondering which products will be best for your needs? Call us - we will advise you and choose the right solution.
Contractor support
Do you need help with construction work? Let us know and we will recommend proven contractors.
Stationary points
Do you want to collect the products in person? Or maybe you prefer to talk live? Visit our branch in: Warsaw, Wrocław, Katowice or Gdańsk.
Wholesale orders
Are you looking for systems and products for investment? Send your phone number. We will call you back with an offer including an investment discount.
Anti-corrosion
Fire retardant
Resin floors
Roofs
Tanks and swimming pools
Terraces and balconies
Hygienic paints
Facades and interiors
Accessories
Call:
 (1).png)
+48 717 026 346