Liquid roof waterproofing membrane cured with UV radiation. It can be used on all types of roof coverings, including roofing felt . The white coating perfectly reflects sunlight (as much as 88%) and reduces the temperature on the roof by up to 40% . Provides full sealing and resistance to weather conditions.
NOTE: WATER-BASED PRODUCT. Choose temperature-controlled shipping to receive the product on the declared date, regardless of the weather. Standard shipments may be held due to temperatures below 5°C along the delivery route.
Do you have any questions? Call:
+48 717 026 346
Neoroof sun reflective coating is a hybrid sealing membrane for roofs covered with felt, hardening under the influence of UV radiation. Can be used on roofs where water stagnation occurs. Provides complete sealing and protection against water. The white coating perfectly reflects sunlight (as much as 88%) and reduces the temperature on the roof by up to 40%. By using a liquid waterproof membrane, you can save time and money when renovating the roof - there is no need to remove the old roofing felt.
All the above-mentioned primers should be used in accordance with their technical data sheets. If there are cracks larger than 1.5 mm on the surface or if we want to extend the durability of our coating, it can be reinforced with Neotextile . Jointex flexible acrylic mass .
Is effective roof protection against heating required? A sun-reflecting coating will be a perfect solution if you want easy application and moisture insulation. The products we offer provide permanent protection for surfaces covered with roofing felt, concrete, finished with cement tiles and metal - after using an appropriate primer. They are also an excellent protection for bituminous substrates, as they inhibit the processes of aging and destruction.
The hybrid liquid acrylic membrane creates a seamless, sun-reflecting coating - by choosing a white product, you can reduce the roof temperature by up to 40%! The layer obtained on the surface is:
The sun-reflecting coating is designed to be applied with a roller and does not require removing the old felt. Your work will be quick and efficient, and you will save time and money because you do not have to worry about disposal. You can also use products from this category to increase the efficiency of photovoltaic panels.
| Product | NEOPROOF POLYUREA R | NEOPROOF POLYUREA C1 | NEOPROOF PU W-40 | NEOPROOF PU FAST -30 | NEOROOF | |
| Resistance to early rain | After 1 hour | After 2 hours | Lack | After 1 hour | Lack | |
| Temperature range during application | +5°C to +35°C | +5°C to +35°C | +5°C to +40°C | +5°C to +40°C | +12°C to +40°C | |
| Wear | Bye Bye | 1.5-1.6 kg/m2 for two layers (without reinforcing non-woven fabric) 2.5-3 kg/m2 for three layers (with reinforcing non-woven fabric) |
1.5 kg/m2 in two layers | 1.5-1.6 kg/m2 bituminous substrates, without reinforcing non-woven fabric 2.5-3 kg/m2 degraded bituminous substrates, with reinforcing non-woven fabric |
1.5-1.6 kg/m2 bituminous substrates, without reinforcing non-woven fabric 2.5-3 kg/m2 degraded bituminous substrates, with reinforcing non-woven fabric |
1.5-1.6 kg/m2 for two layers 2.5 kg/m2 degraded substrates, application with reinforcing non-woven fabric |
| Concrete | 1.2 kg/m2 for two layers (flat surface) | 0.75 kg/m2 in one layer | 1.2-1.3 kg/m2 | 1.2-1.3 kg/m2 | 0.7 kg/m2 for two layers (also cement surface) | |
| Metal | 1.2 kg/m2 for two layers (flat surface) | 0.75 kg/m2 in one layer | 1.2-1.3 kg/m2 (also PUR foam, polystyrene) | 1.2-1.3 kg/m2 (also PUR foam, polystyrene) | 0.5-0.7 kg/m2 (also PUR foam, Styrofoam, without mesh) | |
| Estimated durability of the coating | 2 layers >20 years 2 layers with Neotextile mesh >25 years |
1 layer >20 years | 2 layers >11 years 3 layers >12 years 3 layers with Neotextile >20 years |
2 layers >11 years 3 layers >12 years 3 layers with Neotextile >20 years |
2 layers >10 years 3 layers >12 years 3 layers with Neotextile mesh >15 years |
|
| Time to apply the next layer | +5°C - 24 h +23°C - 18 h +35°C - 10 h |
+5°C - 24 h +23°C - 18 h |
24 hours | +10°C - 5 h +23°C - 3 h +35°C - 2 h |
24 hours | |
| Type of membrane | Poliurecznikowa 2K | Poliurecznikowa 2K | Polyurethane 1K | Polyurethane 1K | Hybrid 1K | |
| Dispersion | Solvent-based | Solvent-based | Aqueous | Aqueous | Aqueous | |
| Temperature range in which the coating retains its properties | -35°C to +80°C | -35°C to +80°C | -40°C to +80°C | -30°C to +80°C | -35°C to +80°C | |
| Cool Material Certificate | YES | Lack | YES | YES | YES | |
| Broof classification (t1) | YES | Lack | YES | Lack | Lack | |
Do you have any questions? We will help you choose the perfect product to use.
Call:
+48 717 026 346
full coverage: 0.5-0.7 kg/m 2 (concrete, metal, PUR foam, polystyrene, without mesh); 1.5 kg/m 2 (roof felt, without mesh); 2-2.5 kg/m 2 (degraded substrates, application with reinforcing non-woven fabric)
13 kg
Water-based
2-3 hours
24 hours
Let us know what you need and we will even match products to your project on the same day.
Need advice?
We will choose the right solution“Cool roof” means a roof system that provides a high ability to reflect solar radiation. Thanks to this, the roof temperature is much lower than when using typical roofing materials, such as bituminous felt. Materials certified as “cool roof material” are usually white.
These membranes reflect a very high percentage of solar radiation, up to 88%. Thanks to this, the temperature on the roof can be reduced by up to 40%. This has a real impact on the temperature in the rooms under the roof, as well as on the costs of air conditioning the rooms. These membranes, in addition to their reflective properties, also provide waterproofing and long-term durability.
Liquid membranes are an easy-to-apply material and can be applied to various construction substrates (using systemic primers where required). We can apply it using high-pressure spray, brush or roller. The main thing is not to save on the material, which will ensure the tightness and durability of the coating.
Choose accessories
Premium class brush with natural and synthetic bristles, for painting with emulsions and water-based facade paints.
Liquid roof waterproofing membrane cured with UV radiation. It can be used on all types of roof coverings, including roofing felt . The white coating perfectly reflects sunlight (as much as 88%) and reduces the temperature on the roof by up to 40% . Provides full sealing and resistance to weather conditions.
Get a discount for your company by talking to an advisor.
Epoxy, water-soluble primer improving the adhesion of very smooth substrates. For any type of paint.
Strengthens waterproofing membranes. For pasting in vertical-horizontal joints and for connecting various types of substrates before applying the membrane, e.g. roofing felt to metal.
Strengthens waterproofing membranes. For pasting in vertical-horizontal joints and for connecting various types of substrates before applying the membrane, e.g. roofing felt to metal.
Concentrated agent for degreasing surfaces before painting. Mainly recommended for use before painting with anti-corrosion products.
Water-soluble primer that facilitates the adhesion of paint coatings to difficult substrates.
Suitable for water-based, solvent-based and solvent-free coatings.
Putty for joints and gaps. It works together with the substrate, is resistant to weather conditions and can be repainted. Recommended for flexible roof coatings.
See other products from this category
Fast drying water-based aliphatic polyurethane waterproofing coating for roofs, resistant to early rain and extremely low temperatures.
A two-component, cold-applied polyurea waterproofing membrane for roofs, terraces or balconies. Rain-resistant after 1 hour of application. Prevents moisture absorption and seals. Resistant to UV radiation and mechanical damage.
Neoproof Polyurea R liquid roofing membrane is root resistant (according to CEN/TS 14416:2014 ) and certified for external fire resistance according to EN 13501-5 . Polyurea R is classified as Broof (t1) and has certified Cool Roof properties (Cool Material ).
One-component roof waterproofing for cold application. Recommended for roofs covered with felt , concrete flat roofs and metal roofs. Resistant to UV and mechanical loads. It creates a smooth, uniform waterproofing coating without joints, resistant to a wide temperature range from -40°C to +80°C . It has sun-reflecting and "cool roof" properties confirmed by the Cool Material certificate (white color).
How to increase the efficiency of photovoltaic panels?
Elimination of urban heat islands thanks to roof membranes in light colors
Roof waterproofing - an overview of effective and durable solutions
Waterproofing of industrial halls - roofs
Proven products
Here you will find products with high strength and technical parameters. Thanks to this, you can enjoy long-lasting effects.
Help in choosing
Are you wondering which products will be best for your needs? Call us - we will advise you and choose the right solution.
Contractor support
Do you need help with construction work? Let us know and we will recommend proven contractors.
Stationary points
Do you want to collect the products in person? Or maybe you prefer to talk live? Visit our branch in: Warsaw, Wrocław, Katowice or Gdańsk.
Wholesale orders
Are you looking for systems and products for investment? Send your phone number. We will call you back with an offer including an investment discount.
Anti-corrosion
Fire retardant
Resin floors
Roofs
Tanks and swimming pools
Terraces and balconies
Hygienic paints
Facades and interiors
Accessories
Call:
+48 717 026 346