EPIMAL 200 water-soluble epoxy paint

Epimal 200 is a two-component water-soluble epoxy paint intended for painting surfaces particularly exposed to damage and dirt (often requiring washing) in public buildings (schools, offices, railway stations), health care facilities, catering facilities, hotel halls, garages, car washes, corridors and staircases and those exposed to frequent contact with aggressive chemicals, e.g. floors of production and warehouse halls, warehouses, including the food industry (breweries, distilleries, bakeries, dairies, butcheries, slaughterhouses, processing plants, bottling plants), as well as swimming pools and other similar tanks.

Epimal 200 approved paint - priming the substrate

• When painting walls and concrete surfaces, recommended primer: Epimal G20 . Epimal 200 is an epoxy (hard) paint - for this reason it requires an epoxy primer. Applying a soft acrylic primer will result in the coating peeling and falling off.
• Super Binder 3333 adhesive primer .
• Prime steel surfaces with Epimal Stal .

Epimal 200 - properties

• It has the National Institute of Hygiene Certificate - a product intended for painting building surfaces inside residential premises, public buildings, healthcare, warehouse and production premises, including the food industry, with direct contact with water intended for human consumption (tanks can be filled with water after 14 days from the date of installation). last coat of paint).
• It provides a durable, waterproof coating that is largely resistant to chemical agents (diluted acids, alkalis, salts, oils, greases, fuels, solvents, detergents, etc.).
• The dirty paint surface can be washed under pressure using detergents and disinfectants.
• It contains a water dispersion of epoxy resin, durable pigments, specially selected, chemically resistant mineral and synthetic fillers and modifying agents. An aqueous solution of the epoxy-polyamine adduct is used as the hardener.
• Temperature resistance: permanent contact - dry environment 100°C, humid environment or immersion 40°C; temporary contact - dry environment 150°C, humid environment or immersion 80°C.

Epimal 200 - food products

The paint coating is approved for direct contact with food:

• non-alcoholic and alcoholic drinks with alcohol content less than 5% and pH higher than 4.5: water, ciders, fruit juices, vegetable juices, natural and concentrated, musts, fruit nectars, lemonades and mineral waters, syrups, bitter infusions, coffee , tea, beer,
• dry products: cereals, cereal products (flour, starch, flakes, pasta),
• confectionery products without fat on the surface (biscuits, salty sticks),
• cooking oils with temperatures up to +40°C,
• salt,
• sugar and derivatives: honey, molasses, syrups,
• whole, fresh and chilled fruits and vegetables,
• fruit and vegetable products with pH > 4.5, shelled and dried nuts,
• milk products.

Epimal 200 - application

It is recommended for painting concrete surfaces (e.g. floors, concrete structures, pillars, spans) and steel surfaces, directly or after priming with epoxy primer. It can also be used on other building materials, such as plaster, bricks, wood and wood-based materials (to a limited extent).

Epimal 200 - substrate preparation

• The substrate should be frost-free, load-bearing, clean, free of cement laitance, grease stains and dust.
• The surface to be renovated should be thoroughly dusted and degreased (especially traces of oil and grease), and cleaned of moss and lichen.
• Old peeling and cracked paint coatings must be removed.
• Fresh cement-lime plaster and concrete surfaces can be painted no earlier than 4 weeks after application.
• Matte smooth surfaces with sandpaper.

Epimal 200 is a two-component paint (the price is for the set, i.e. the base with the hardener). To make it easier to combine the ingredients, we recommend a cup for mixing paints and varnishes .