STUCCOLINI acrylic putty

Professional acrylic putty

• Contains aqueous acrylic dispersion, natural mineral fillers and refining agents,
• Can be easily spread over large surfaces, creating a smooth, hard, sandable layer.
• Compared to gypsum fillers, it has: better adhesion to smooth surfaces, greater resistance to mechanical damage and provides wider possibilities in choosing the topcoat,
• It is not a stand-alone coating, surfaces covered with a layer of putty should be painted with an appropriate topcoat before being put into operation,
• Layer thickness 1-3 mm,
• Grain size 0-60 μm,
• It has the NIZP-PZH Hygienic Certificate (a product intended for filling surfaces and cracks outside buildings and inside residential, public, health care, warehouse and production premises, including in the food industry - without direct contact with food).

Professional acrylic putty - substrate preparation

• The surface to be filled should be thoroughly cleaned, remove loose patches of paint and wallpaper, degrease and vacuum,
• Fresh cement-lime plaster can be putty only after 3-4 weeks of seasoning,
• Metal surfaces should be primed with anti-corrosion paint,
• Apply the mass to the prepared surface with a putty knife or a masonry trowel,
• After drying, sand with sandpaper,
• All types of emulsion, oil and phthalic primers and paints can be applied to the thoroughly dried and dust-free layer - it provides good adhesion to most surface paints, e.g. Biellux , Bielanit , Latex Mat , Latex Ceramic , etc.