A multi-layer, anti-slip system with a durable, UV-resistant aliphatic polyurethane finish. This system is ideal for outdoor and indoor industrial floors and ramps.
Have questions? Call:
+48 717 026 346
A multi-layer, anti-slip system with a durable, UV-resistant aliphatic polyurethane finish. This system is ideal for outdoor and indoor industrial floors and ramps.
1. Concrete base
2. Priming with Neopox® Primer WS
3. Leveling layer Epoxol® Primer SF-P mixed with quartz sand
4. Cover with quartz sand
Neodur® Special sealing layer
| Construction of the Neodur® Special ML-20r WS system and approximate consumption | ||
| Layer | Product | Wear |
|
Priming* |
Neopox® Primer WS |
200-300 g |
|
Leveling layer |
Epoxol® Primer SF-P + quartz sand 0.1-0.3 mm (1:1 w/w) |
1.2-1.4 kg/m 2 for the mixture (= 0.6-0.7 kg/m 2 resin + 0.6-0.7 kg/m 2 quartz sand) |
|
Cover with quartz sand |
Quartz sand 0.3-0.8 mm |
~3-4 kg/m2 ( in excess) |
|
Sealing layer |
Neodur® Special |
~700 g/m2 in 3 layers with a roller |
*An alternative primer from Neotex can be used after consultation with our Technical Advisor.
Neopox® Primer WS - an epoxy primer for use on damp concrete floors (factories, laboratories, warehouses, supermarkets, garages, hospitals, schools, etc.). Also for reinforcing cement substrates. Note : If the cause of the substrate's moisture is capillary rise from the ground, use Neopox Primer AY .
Epoxol® Primer SF-P – a two-component, solvent-free epoxy resin. This product can be used both for priming concrete (and other mineral substrates) and for combining with quartz aggregate to create repair compounds or epoxy screeds.
Neodur® Special – a polyurethane resin resistant to UV radiation and other atmospheric factors. Provides high mechanical and chemical resistance.
Quartz sand – an additive to resins that imparts anti-slip properties to surfaces. Often used as an additive to increase their strength and hardness. Available in various sizes.
.jpg)
Have questions? We'll help you choose the perfect product for your application.
Call:
+48 717 026 346
2 mm
Anti-slip - Uniformly rough (effect of dense quartz layer) - Colorful
MD/HD (medium and heavy load)
<100 mg (Taber Test, CS 10/1000/1000)
≥3 N/mm²
≥4 Nm – IR4
>50 PTV (Pendulum Test Value, Slider 96)
Equivalent to R12
>50 MPa
>40 MPa
-30°C min. / +80°C max.
Epoxy resin for floor screeds. Self-leveling and solvent-free, resistant to chemicals (alkalis, diluted acids, gasoline, oils, and many solvents), it is available in a wide range of RAL colors. It has a Greek hygiene certificate and is certified for contact with food and alcohol, making it suitable for use in food production and processing areas.
Epoxy resin for use as a primer or structural resin. A solvent-free product for priming walls and floors and creating epoxy screeds.
A solvent-free, epoxy primer that strengthens cementitious substrates. For interior and exterior use.
An epoxy resin additive that provides non-slip properties to surfaces. Available in various sizes.
Let us know what you need and we'll even match products to your project the same day.
Need advice?
We will choose the right solution
A multi-layer, anti-slip system with a durable, UV-resistant aliphatic polyurethane finish. This system is ideal for outdoor and indoor industrial floors and ramps.
Get a discount for your company by talking to an advisor.
See other products in this category
Anti-slip, solvent-free, self-leveling epoxy system with a durable finish, ideal for interior industrial floors exposed to high mechanical and chemical loads.
Anti-slip, solvent-free epoxy coating system with a coloured quartz stripe intermediate layer and a colourless top coat for interior decorative resin floors.
A smooth, solvent-free epoxy coating system for interior industrial floors. Ideal for car parks. Also suitable for water tanks.
A smooth, water-based, ultra-low VOC epoxy coating system with a satin, abrasion-resistant finish for interior floors. Also ideal for walls and ceilings, especially in wet areas.
Smooth, solvent-free, self-leveling epoxy system for indoor industrial floors exposed to high mechanical and chemical loads.
A thick-layer flooring system with a full-coverage, colored flake intermediate layer and a glossy or satin topcoat. For decorative resin floors, ideal for garages.
Anti-slip, solvent-free epoxy coating system for indoor industrial floors.
Smooth, solvent-free epoxy coating system for interior industrial floors.
How to Finish Your Garage Floor? Thin-film resin systems you can apply at home
Resin flooring systems - ready-made solutions for industry and beyond
Flooring for halls, garages, and warehouses - which solutions should you choose before the heavy-duty season? TrokenTech resin flooring systems
Proven products
We offer products with high durability and technical parameters, ensuring long-lasting results.
Help in choosing
Wondering which products will best suit your needs? Call us – we'll advise you and choose the right solution.
Contractor support
Need help with construction work? Let us know, and we'll recommend trusted contractors.
Stationary points
Want to pick up your products in person? Or perhaps you'd prefer to chat face-to-face? Visit our branches in Warsaw, Wrocław, Katowice, or Gdańsk.
Wholesale orders
Looking for systems and products for investment? Send us your phone number and we'll call you back with an offer including an investment discount.
Anti-corrosion
Fireproof
Resin floors
Roofs
Tanks and pools
Terraces and balconies
Hygienic paints
Facades and interiors
Accessories
Call:
+48 717 026 346