Anti-slip, fast-curing aliphatic polyurea coating system with an abrasion-resistant finish and high resistance to UV radiation. Use for external and internal floors.
Anti-slip, fast-curing aliphatic polyurea coating system with an abrasion-resistant finish and high resistance to UV radiation. Use for external and internal floors.
1. Concrete base
2. Priming:
Inside : Neodur® Fast TRACK PR
Outside : Neopox® Primer WS
Neodur® FT Elastic base layer
4. Backfill with quartz sand
Neodur® FT Elastic sealing layer
| Construction of the Neodur® FT Elastic C-10r PR system and approximate consumption | ||
| Layer | Product | Wear |
|
Priming* |
Inside: Neodur® Fast TRACK PR |
0.12-0.15 kg/ |
|
Outside: Neopox® Primer WS |
0.6 kg/ |
|
|
Base layer |
Neodur® FT Elastic |
~ 0.3 kg/ |
|
Backfill with quartz sand |
Quartz sand 0.8-0.1.2 mm |
~3 kg/ |
|
Sealing layer |
Neodur® FT Elastic |
0.5 kg/ |
*An alternative primer from Neotex can be used, after consultation with our Technical Advisor.
Neodur® Fast Track PR - an innovative hybrid primer, a combination of polyurethane and polyurea. Can be applied at low temperatures, even down to -10°C. It allows the surface to be applied just 3 hours after applying the primer (at +25°C).
Neopox® Primer WS - epoxy primer for use on damp concrete floors (factories, laboratories, warehouses, supermarkets, garages, hospitals, schools, etc.). Also for strengthening cement substrates. Note - if the cause of substrate moisture is capillary action from the ground, then Neopox Primer AY .
Neodur® FT Elastic - polyaspartic resin ensuring a waterproofing effect and aesthetics on terraces and balconies. Resistant to weather conditions and UV radiation.
Quartz sand - an addition to resins that gives the surface anti-slip properties. Often used as an additive to increase their strength and hardness. Available in various sizes.
1mm
Anti-slip - Uniformly rough (effect of dense quartz grit) - Colored
LD/MD (light/medium duty)
<100 mg (Taber Test, CS 10/1000/1000)
≥2.5 N/mm²
35 to 50 PTV (Pendulum Test Value, Slider 96)
Equivalent to R11
<0.1 kg/ m2 h 0.5
-30°C min. / +80°C max.
Let us know what you need and we will even match products to your project on the same day.
Need advice?
We will choose the right solution
Solvent-free, epoxy primer strengthening cement substrates. For internal and external use.
Systemic primer for use under the Neodur Fast Track polyurea/polyaspartic flooring resin. Can be applied at low temperatures, even down to -10°C. It allows the surface to be applied just 3 hours after applying the primer (at +25°C).
Polyaspartic resin providing a waterproofing effect and aesthetics on terraces and balconies. Resistant to weather conditions and UV radiation.
An additive to epoxy resins that gives the surface anti-slip properties. Available in various sizes.
Anti-slip, fast-curing aliphatic polyurea coating system with an abrasion-resistant finish and high resistance to UV radiation. Use for external and internal floors.
See other products from this category
A smooth epoxy coatings system with very low LZO emissions. Possibility of application up to 15 mm in one layer and topically up to 30 mm. Abrasion resistant finish. Designed for internal floors.
Anti-slip, solvent-free epoxy coating system for interior industrial floors.
Anti-slip, solvent-free, self-leveling epoxy system with a durable finish, ideal for indoor industrial floors exposed to high mechanical and chemical stress.
A decorative, coating flooring system with an interlayer of thinly colored colored flakes and a glossy or satin topcoat. Perfect for private garages, corridors and areas with low or medium loads.
A decorative, water-based coating flooring system with an interlayer of thinly grained colored flakes and a glossy or satin topcoat. Perfect for private garages, corridors and areas with low or medium loads.
Anti-slip, solvent-free system based on transparent epoxy resin as a binder for colored aggregates. For use on interior decorative and industrial floors and parking lots.
The garage set has been specially designed to protect garage and basement floors, made of concrete or screed. It contains not only the resin material itself, but also all necessary tools.
Smooth, solvent-free, self-leveling system, with abrasion-resistant aliphatic polyurethane with high UV resistance, for external and internal industrial floors exposed to high mechanical and chemical loads.
How to finish the garage floor? Systems based on thin-film resins that can be applied at home
Resin flooring systems - ready-made solutions for industry and beyond
Proven products
Here you will find products with high strength and technical parameters. Thanks to this, you can enjoy long-lasting effects.
Help in choosing
Are you wondering which products will be best for your needs? Call us - we will advise you and choose the right solution.
Contractor support
Do you need help with construction work? Let us know and we will recommend proven contractors.
Stationary points
Do you want to collect the products in person? Or maybe you prefer to talk live? Visit our branch in: Warsaw, Wrocław, Katowice or Gdańsk.
Wholesale orders
Are you looking for systems and products for investment? Send your phone number. We will call you back with an offer including an investment discount.
Anti-corrosion
Fire retardant
Resin floors
Roofs
Tanks and swimming pools
Terraces and balconies
Hygienic paints
Facades and interiors
Accessories
Call:
+48 717 026 346
+48 717 026 346
