Anti-slip, fast-curing aliphatic polyurea coating system with an abrasion-resistant finish and high UV resistance. Suitable for both indoor and outdoor floors.
Have questions? Call:
+48 717 026 346
Anti-slip, fast-curing aliphatic polyurea coating system with an abrasion-resistant finish and high UV resistance. Suitable for both indoor and outdoor floors.
1. Concrete base
2. Priming:
inside : Neodur® Fast Track PR
exterior : Neopox® Primer WS
Neodur® FT Elastic base layer
4. Cover with quartz sand
Neodur® FT Elastic sealing layer
| Construction of the Neodur® FT Elastic C-10r PR system and approximate consumption | ||
| Layer | Product | Wear |
|
Priming* |
inside: Neodur® Fast Track PR |
0.12-0.15 kg/ |
|
exterior: Neopox® Primer WS |
0.6 kg/ |
|
|
Base layer |
Neodur® FT Elastic |
~0.3 kg/ |
|
Cover with quartz sand |
Quartz sand 0.8-0.1.2 mm |
~3 kg/ |
|
Sealing layer |
Neodur® FT Elastic |
0.5 kg/ |
*An alternative primer from Neotex can be used after consultation with our Technical Advisor.
Neodur® Fast Track PR – an innovative hybrid primer combining polyurethane and polyurea. It can be applied at low temperatures, down to -10°C. It allows for the application of the surface within 3 hours of applying the primer (at +25°C).
Neopox® Primer WS - an epoxy primer for use on damp concrete floors (factories, laboratories, warehouses, supermarkets, garages, hospitals, schools, etc.). Also for reinforcing cement substrates. Note : If the cause of the substrate's moisture is capillary rise from the ground, use Neopox Primer AY .
Neodur® FT Elastic – a polyaspartic resin that provides waterproofing and aesthetics on terraces and balconies. Resistant to weather conditions and UV radiation.
Quartz sand – an additive to resins that imparts anti-slip properties to surfaces. Often used as an additive to increase their strength and hardness. Available in various sizes.
Have questions? We'll help you choose the perfect product for your application.
Call:
+48 717 026 346
1 mm
Anti-slip - Uniformly rough (effect of dense quartz backfill) - Colorful
LD/MD (Light/Medium Duty)
<100 mg (Taber Test, CS 10/1000/1000)
≥2.5 N/mm²
35 to 50 PTV (Pendulum Test Value, Slider 96)
Equivalent to R11
<0.1 kg/ m2 h 0.5
-30°C min. / +80°C max.
A solvent-free, epoxy primer that strengthens cementitious substrates. For interior and exterior use.
A systemic primer for use under Neodur Fast Track polyurea/polyaspartic flooring resin. It can be applied at low temperatures, down to -10°C. It allows for the application of the surface within 3 hours of applying the primer (at +25°C).
A polyaspartic resin that provides waterproofing and aesthetics on terraces and balconies. Resistant to weather conditions and UV radiation.
An epoxy resin additive that provides non-slip properties to surfaces. Available in various sizes.
Let us know what you need and we'll even match products to your project the same day.
Need advice?
We will choose the right solution
Anti-slip, fast-curing aliphatic polyurea coating system with an abrasion-resistant finish and high UV resistance. Suitable for both indoor and outdoor floors.
Get a discount for your company by talking to an advisor.
See other products in this category
A non-slip, cold-applied polyurea waterproofing system with a durable finish, ideal for rooftop parking lots, balconies, or patios with heavy traffic. It also works well on vehicle ramps.
A smooth, primerless, ultra-low VOC epoxy coating system. Can be applied up to 15 mm in a single coat, or up to 30 mm in spots. Abrasion-resistant finish. Designed for interior floors.
Anti-slip, solvent-free epoxy coating system for indoor industrial floors.
A decorative flooring coating system with a thin- or full-coverage colored flake intermediate layer and a glossy or satin topcoat. Ideal for garages, hallways, and areas with low to medium traffic.
A decorative, water-based floor coating system with a thin- or full-coverage colored flake intermediate layer and a glossy or satin topcoat. Ideal for garages, hallways, and areas with low to medium traffic.
A decorative flooring coating system with a full-coverage, colored flake intermediate layer and a glossy or satin topcoat. Ideal for private garages, hallways, and areas with low to medium traffic.
Anti-slip, solvent-free epoxy coating system for indoor industrial floors.
A non-slip, solvent-free, multi-layer epoxy system with a durable finish and high impact resistance. Ideal for interior applications exposed to high mechanical and chemical stress. Also suitable for ramps.
How to Finish Your Garage Floor? Thin-film resin systems you can apply at home
Resin flooring systems - ready-made solutions for industry and beyond
Flooring for halls, garages, and warehouses - which solutions should you choose before the heavy-duty season? TrokenTech resin flooring systems
Proven products
We offer products with high durability and technical parameters, ensuring long-lasting results.
Help in choosing
Wondering which products will best suit your needs? Call us – we'll advise you and choose the right solution.
Contractor support
Need help with construction work? Let us know, and we'll recommend trusted contractors.
Stationary points
Want to pick up your products in person? Or perhaps you'd prefer to chat face-to-face? Visit our branches in Warsaw, Wrocław, Katowice, or Gdańsk.
Wholesale orders
Looking for systems and products for investment? Send us your phone number and we'll call you back with an offer including an investment discount.
Anti-corrosion
Fireproof
Resin floors
Roofs
Tanks and pools
Terraces and balconies
Hygienic paints
Facades and interiors
Accessories
Call:
+48 717 026 346