Anti -slip multilayer system with a durable finish and high impact resistance. This system is ideal for external and internal industrial floors exposed to high mechanical and chemical loads. It is also suitable for ramps.
Anti -slip multilayer system with a durable finish and high impact resistance. This system is ideal for external and internal industrial floors exposed to high mechanical and chemical loads. It is also suitable for ramps.
1. Concrete base
2. Priming:
inside : EPOXOL® PRIMER SF-P
Outside : Neopox® Primer WS
3. Supporting layer Epoxol® Primer SF-P mixed with quartz sand
4. Backfill with quartz sand
5. Supporting layer Epoxol® Primer SF-P mixed with quartz sand
6. Backfill with quartz sand
7. Sealing layer Neodur® Fast Track SF
| Construction of the Neodur® Fast Track SF ML-15r PR system and approximate consumption | ||
| Layer | Product | Wear |
|
Priming* |
inside: EPOXOL® PRIMER SF-P |
0.2-0.3 kg/ |
|
Outside: Neopox® Primer WS |
0.6 kg/ |
|
|
Supporting layer |
EPOXOL® Primer SF-P + Quartz sand 0.1-0.3 (ratio 1: 1 W/W) |
1.2-1.4 kg/m 2 for the mixture (= 0.6-0.7 kg/m 2 resin + 0.6-0.7 kg/m 2 quartz sand) |
|
Backfill with quartz sand |
Quartz sand 0.4-0.8 mm |
~3-4 kg/m 2 (in excess) |
|
Supporting layer |
EPOXOL® Primer SF-P + Quartz sand 0.1-0.3 (ratio 1: 1 W/W) |
1.6-1.8 kg/m 2 for the mixture (= 0.8-0.9 kg/m 2 resin + 0.8-0.9 kg/m 2 quartz sand) |
|
Backfill with quartz sand |
Quartz sand 0.4-0.8 mm |
~3-4 kg/m 2 (in excess) |
|
Sealing layer |
Neodur® Fast Track SF |
0.6 kg/ |
*An alternative primer from Neotex can be used, after consultation with our Technical Advisor.
Epoxol® Primer SF-P - two-component, solvent-free epoxy resin. The product can be used both for priming concrete (and other mineral substrates) and for combining with quartz aggregate to create repair masses or epoxy screeds.
Neopox® Primer WS - epoxy primer for use on damp concrete floors (factories, laboratories, warehouses, supermarkets, garages, hospitals, schools, etc.). Also for strengthening cement substrates. Note - if the cause of substrate moisture is capillary action from the ground, then Neopox Primer AY .
Neodur® Fast Track SF - high-build, solvent-free floor coating. It can be used outdoors, but also without problems indoors, due to the lack of solvents in the composition and low odor ("SF" in the name from the English "solvent free").
Quartz sand - an addition to resins that gives the surface anti-slip properties. Often used as an additive to increase their strength and hardness. Available in various sizes.
.jpg)
4.0 mm
Anti-slip - Uniformly rough (effect of dense quartz embankment) - Colored
MD/HD (medium/heavy duty)
<100 mg (Taber Test, CS 10/1000/1000)
≥2.5 N/mm²
≥6 Nm – IR6
>50 PTV (Pendulum Test Value, slider 96)
Equivalent to R12
> 55 MPa
>40 MPa
-30°C min. / +100°C max.
Epoxy resin for use as a primer or construction resin. A solvent-free product for priming walls and floors and creating the so-called epoxy screeds.
Systemic primer for use under the Neodur Fast Track polyurea/polyaspartic flooring resin. Can be applied at low temperatures, even down to -10°C. It allows the surface to be applied just 3 hours after applying the primer (at +25°C).
Solvent-free, high-build polyurea/polyaspartic resin. The entire system (primer + two layers of resin) within 9 hours (at 25°C). It can also be applied at low temperatures, even down to -10°C .
Let us know what you need and we will even match products to your project on the same day.
Need advice?
We will choose the right solution
Anti -slip multilayer system with a durable finish and high impact resistance. This system is ideal for external and internal industrial floors exposed to high mechanical and chemical loads. It is also suitable for ramps.
See other products from this category
Smooth, solvent-free, self-leveling epoxy system for interior industrial floors exposed to high mechanical and chemical loads.
An anti-slip multi-layer system in which the finishing layer is durable aliphatic polyurethane with high resistance to UV radiation. This system is ideal for outdoor and indoor industrial floors and ramps.
Smooth, solvent-free, self-leveling system, with abrasion-resistant aliphatic polyurethane with high UV resistance, for external and internal industrial floors exposed to high mechanical and chemical loads.
Anti-slip, solvent-free epoxy coating system for interior industrial floors.
Anti-slip, fast curing aliphatic polyurea coating system, with an abrasion resistant finish with high UV resistance, for outdoor and indoor floors.
Smooth, solvent-free, self-leveling epoxy system for interior industrial floors exposed to high mechanical and chemical loads.
Smooth, solvent-free, self-leveling epoxy system for interior industrial floors.
Anti-slip, solvent-free, multi-layer epoxy system with a durable finish and high impact resistance. Ideal for indoor applications exposed to high mechanical and chemical loads. Also suitable for ramps.
How to finish the garage floor? Systems based on thin-film resins that can be applied at home
Resin flooring systems - ready-made solutions for industry and beyond
Proven products
Here you will find products with high strength and technical parameters. Thanks to this, you can enjoy long-lasting effects.
Help in choosing
Are you wondering which products will be best for your needs? Call us - we will advise you and choose the right solution.
Contractor support
Do you need help with construction work? Let us know and we will recommend proven contractors.
Stationary points
Do you want to collect the products in person? Or maybe you prefer to talk live? Visit our branch in: Warsaw, Wrocław, Katowice or Gdańsk.
Wholesale orders
Are you looking for systems and products for investment? Send your phone number. We will call you back with an offer including an investment discount.
Anti-corrosion
Fire retardant
Resin floors
Roofs
Tanks and swimming pools
Terraces and balconies
Hygienic paints
Facades and interiors
Accessories
Call:
+48 717 026 346
+48 717 026 346
