Anti-slip, fast curing aliphatic polyurea coating system, with an abrasion resistant finish with high UV resistance, for outdoor and indoor floors.
Anti-slip, fast curing aliphatic polyurea coating system, with an abrasion resistant finish with high UV resistance, for outdoor and indoor floors.
1. Concrete base
2. Priming:
Inside : Neodur® Fast TRACK PR
Outside : Neopox® Primer WS
Neodur® Fast Track base layer
4. Backfill with quartz sand
| Construction of the Neodur® Fast Track C-2s PR system and approximate consumption | ||
| Layer | Product | Wear |
|
Priming* |
Inside: Neodur® Fast TRACK PR |
120-150 g/ |
|
Outside: Neopox® Primer WS |
600 g/ |
|
|
Base layer |
Neodur® Fast Track |
~200 g/ |
| Backfill with quartz sand | Quartz sand 0.1-0.3 mm | ~2-3 kg/m 2 (in excess) |
|
Closing layer |
Neodur® Fast Track |
~300 g/ |
*An alternative primer from Neotex can be used, after consultation with our Technical Advisor.
Neodur® Fast Track PR - an innovative hybrid primer, a combination of polyurethane and polyurea.
Neopox® Primer WS - epoxy primer for use on damp concrete floors (factories, laboratories, warehouses, supermarkets, garages, hospitals, schools, etc.). Also for strengthening cement substrates. Note - if the cause of substrate moisture is capillary action from the ground, then Neopox Primer AY .
Neodur® Fast Track - polyaspartic/polyurea flooring resin enabling the application of the entire system within 8 hours. Provides a coating with high mechanical resistance. Can be applied at lower temperatures, even down to -10°C.
Quartz sand - an addition to resins that gives the surface anti-slip properties. Often used as an additive to increase their strength and hardness. Available in various sizes.
400 μm
Anti-slip - Uniformly rough (effect of dense quartz grit) - Colored
LD/MD (Light-Medium Duty)
<100 mg (Taber Test, CS 10/1000/1000)
≥2.5 N/mm²
>25 PTV (Pendulum Test Value, slider 96)
Equivalent to R10
<0.1 kg/ m2 h 0.5
-20°C min. / +80°C max.
Let us know what you need and we will even match products to your project on the same day.
Need advice?
We will choose the right solution
Solvent-free, epoxy primer strengthening cement substrates. For internal and external use.
Polyaspartic/polyurea flooring resin enabling the application of the entire system within 8 hours. Provides a coating with high mechanical resistance. Possibility of application at lower temperatures, even down to -10°C .
Systemic primer for use under the Neodur Fast Track polyurea/polyaspartic flooring resin. Can be applied at low temperatures, even down to -10°C. It allows the surface to be applied just 3 hours after applying the primer (at +25°C).
Anti-slip, fast curing aliphatic polyurea coating system, with an abrasion resistant finish with high UV resistance, for outdoor and indoor floors.
See other products from this category
Water-based decorative floor coating system with an interlayer of full-grain colored flakes and a glossy or satin topcoat. Perfect for private garages, corridors and areas with low or medium loads.
An anti-slip multi-layer system in which the finishing layer is durable aliphatic polyurethane with high resistance to UV radiation. This system is ideal for outdoor and indoor industrial floors and ramps.
Anti-slip, solvent-free system based on transparent epoxy resin as a binder for colored aggregates. For use on interior decorative and industrial floors and parking lots.
Anti-slip, solvent-free, self-leveling epoxy system with a durable finish, ideal for indoor industrial floors exposed to high mechanical and chemical stress.
Anti-slip, fast-curing aliphatic polyurea coating system with an abrasion-resistant finish and high resistance to UV radiation. Use for external and internal floors.
A decorative, coating floor based on water with an intermediate layer of colored petals with a rare or full flow and a shiny or satin surface layer. Ideal for garages, corridors and low -load surfaces.
Smooth, solvent-free epoxy coating system for interior industrial floors.
Slip-resistant, cold-applied polyurea waterproofing system with a durable finish, ideal for high-traffic rooftop parking lots, balconies or terraces. It will also work on car ramps.
How to finish the garage floor? Systems based on thin-film resins that can be applied at home
Resin flooring systems - ready-made solutions for industry and beyond
Proven products
Here you will find products with high strength and technical parameters. Thanks to this, you can enjoy long-lasting effects.
Help in choosing
Are you wondering which products will be best for your needs? Call us - we will advise you and choose the right solution.
Contractor support
Do you need help with construction work? Let us know and we will recommend proven contractors.
Stationary points
Do you want to collect the products in person? Or maybe you prefer to talk live? Visit our branch in: Warsaw, Wrocław, Katowice or Gdańsk.
Wholesale orders
Are you looking for systems and products for investment? Send your phone number. We will call you back with an offer including an investment discount.
Anti-corrosion
Fire retardant
Resin floors
Roofs
Tanks and swimming pools
Terraces and balconies
Hygienic paints
Facades and interiors
Accessories
Call:
+48 717 026 346
 (1).png)
+48 717 026 346
