Are you looking for a product that will effectively protect floors in industrial facilities, warehouses, or production halls? If durability and protection against destructive external factors are important to you, check out the selection presented in this category! Here you'll find epoxy resins for floors exposed to high loads and chemicals. Explore our offer and see why it's worth choosing proven products.
We offer colored epoxy resins recommended for interior applications. You can use them on concrete substrates – remember to prepare them properly! Make sure they are clean, free of cracks and irregularities. Sanding them is recommended to improve adhesion, making the epoxy screed easier to spread and more resistant. For priming, choose system resin primers, which are also available in our store. In this category, you'll find epoxy resins for concrete designed for application by roller, squeegee, or spray. Their properties allow for use in facilities with high traffic and mechanical loads, so they are recommended for:
Epoxy resin is used as flooring in these locations because of its unique properties. Among them, it's worth highlighting:
Our product range includes two-component epoxy resins. These products can be used after mixing the base and hardener. This is best done with a wooden mixer if you're using small quantities, or with a low-speed mechanical mixer for larger surfaces. Remember that thorough mixing determines the quality of the floor and its hardening properties, so precision is key.
We will be happy to help you make your choice
Our store offers a solvent-free, alcohol- and solvent-free epoxy floor screed. You can apply it not only to floors but also to harden and protect stairs. We offer colorful products for painting lines and markings on floors. You can purchase them in your chosen shade from the extensive RAL palette. After application, you'll achieve a glossy surface, which you can then top with a clear polyurethane varnish – this provides additional protection and mattifies the surface. Please contact our consultants – they will be happy to provide expert advice and help you select the perfect product for your needs, in line with your individual design goals.
Epoxy resin for floor screeds. Self-leveling and solvent-free, resistant to chemicals (alkalis, diluted acids, gasoline, oils, and many solvents), it is available in a wide range of RAL colors. It has a Greek hygiene certificate and is certified for contact with food and alcohol, making it suitable for use in food production and processing areas.
It provides very high chemical and mechanical resistance. The resin can be applied in thick layers – up to 190 microns in a single layer.
An epoxy coating for floors and walls, as well as for covering mineral substrates or repainting tiles. Suitable for use in food processing plants.
A two-component, solvent-based flooring resin ideal for industrial applications. It creates highly mechanically and chemically resistant coatings. It is easy to clean and repels dirt.
Epoxol ® RM-YR is a two-component, solvent-free, transparent epoxy resin that contains no fillers. It is ideal for industrial and decorative floors with colored aggregate.
Troken Floor PROTECT 3in1 is a two-component, environmentally friendly, water-based epoxy resin. Thanks to specially selected components, it can be used in three applications as a single product. It can be used as an epoxy primer, leveling compound, or smooth topcoat. Troken Floor PROTECT 3in1 is based on an epoxy resin resistant to oil, grease, fuels, and other chemicals. Its low VOC content allows for use in garages, industrial halls, residential buildings, and public buildings.
Troken Floor FAST Special is a high-build, fast-curing, self-leveling epoxy resin designed for industrial applications and decorative projects requiring a perfectly smooth surface. The product allows for the application of 1 to 15 mm of resin in a single layer. It is characterized by very low volatile organic compound (VOC) emissions, making it virtually odorless.
The primary difference between these products is their resistance to sunlight, and therefore their suitability for outdoor use. Epoxy resins are not UV-resistant and cannot be used outdoors unless as a primer or intermediate layer, which is then covered with a suitable topcoat. Some resins for swimming pools or stone carpets are exceptions, but these are rare cases. Polyurethane resins offer two options: products based on aromatic (cheaper) or aliphatic (more expensive) resins. Resins based on aliphatic components are fully UV-resistant, do not yellow, and do not discolor. Such coatings, such as Neodur Special . Another difference between these resins is that polyurethane resins are slightly more flexible than epoxy resins. Therefore, they scratch less and are more impact-resistant. These coatings are comparable in terms of chemical resistance.
To properly apply epoxy resin to a floor, proper substrate preparation is crucial. The concrete substrate should be even, clean, and free from defects, and sanded to open the pores and ensure good adhesion. The concrete itself should be of good quality. The first step is priming the substrate. Apply a resin primer, thoroughly covering the entire surface. If the substrate is found to be more absorbent (dull spots remain), the priming process must be repeated. We choose system-compatible resin primers; floors should not be primed with uniprimer products. Next, we apply the selected flooring resin. Depending on the system, the resin is applied with a roller (coating) or a squeegee (self-leveling). All products in the system are two-component. This means that the two components must be mixed together before application and then used within a specified time.
Depending on the product chosen, you'll need the appropriate tools. Solvent-based coating resins, such as Neopox Special , are applied velour roller or by spraying. Solvent-free coating resins, such as Neopox SF Plus , can also be applied with a velour roller or in one thick layer with a squeegee. Self-leveling epoxy screeds, such as Epoxol Floor , are applied with a squeegee and a de-aeration roller Spiked shoe are also necessary
Epoxy resins are two-component products; before painting, the base and hardener must be combined in the appropriate proportions (by weight or volume). Small amounts of resin (up to 1 kg) can be mixed by hand using a wooden stirrer, for example. Larger amounts should be mixed mechanically, using a low-speed mixer, to avoid entraining air. Incomplete mixing of the components can result in poor curing of the coating, so it's important to pay attention to this aspect of material preparation.
For epoxy resin flooring, the best substrate is good-quality concrete. Painting screed or anhydrite is also possible, but these substrates are more absorbent and may result in lower resin yield.
Epoxy resins are typically topcoated with clear polyurethane varnishes, such as Neodur Varnish or Neodur Varnish W Mat . This protects the surface from scratching and allows for a matte finish if necessary (resins are usually glossy).
Proven products
We offer products with high durability and technical parameters, ensuring long-lasting results.
Help in choosing
Wondering which products will best suit your needs? Call us – we'll advise you and choose the right solution.
Contractor support
Need help with construction work? Let us know, and we'll recommend trusted contractors.
Stationary points
Want to pick up your products in person? Or perhaps you'd prefer to chat face-to-face? Visit our branches in Warsaw, Wrocław, Katowice, or Gdańsk.
Wholesale orders
Looking for systems and products for investment? Send us your phone number and we'll call you back with an offer including an investment discount.
Anti-corrosion
Fireproof
Resin floors
Roofs
Tanks and pools
Terraces and balconies
Hygienic paints
Facades and interiors
Accessories
Call: