PAINT FOR STRIPS AND STAIN

A stain and dirt isolating paint. Water-based paint designed for painting walls and ceilings inside residential spaces, offices, and public buildings. The kdACR ^™ allows the paint to isolate stains and dirt by capturing the colored components of contaminants. It is particularly recommended for covering stains caused by water stains, soot, and nicotine. This stain and dirt isolating paint can be used as a primer or topcoat on a variety of building materials, such as:

• mineral plasters (gypsum, cement, cement-lime)
• polymer plasters (e.g. acrylic)
• bricks
• concrete
• plasterboards

Provides a uniform, well-covering, matte coating.

Paint for streaks and stains - surface preparation and application:

The paint is ready to use; only if it thickens, add up to 5% water. Under no circumstances should chalk, lime, or any other paints or primers be added. The surface to be painted should be thoroughly cleaned, loose paint removed, and degreased. Dry any water stains. Mechanically clean any areas affected by mold or mildew and treat them with GrzyboStop fungicide . Before removing the stains, remove the cause of the stains (leaking gutters, pipes, roofs). Old coats of adhesive and lime paints must be removed. Fresh cement-lime plasters can be painted only 3-4 weeks after application. Matte smooth surfaces with sandpaper. Fill any cracks and chips with Biel-Putz or Filler , and larger gaps with gypsum. Raw, dusty, inconsistent, or excessively water-absorbent substrates should be primed with Grunder . Stir the paint thoroughly before use. Do not mix with other paints or any primers.

• paint with a roller, brush or spray,
• use and store at temperatures from 5°C to 30°C,
• drying time: approx. 3 hours at 20°C (depending on the substrate and ambient conditions),
• applying subsequent layers: after 3 hours,
• recommended number of layers: 1, in special cases: 2,
• efficiency: up to 9 m2 ^/ litre,
• density according to PN-82/C-81551: approx. 1.58 g/cm³,
• pH value: 8÷9,
• washing tools and diluting: water,
• has a Hygiene Certificate from the National Institute of Public Health - National Institute of Hygiene,
• warranty: 12 months from the production date shown on the packaging.
• packaging: 0.5 liters, 1 liter, 5 liters.

The paint effectively isolates stains, so it is perfect for renovating walls with unsightly stains.