LOWIGRAF-PUR STRUKTURALNY decorative polyurethane paint

• matte, hard
• The structural coating eliminates minor defects in the painted substrate
• covering, good adhesion
• resistant to:
  • scratches
  • moisture
  • atmospheric factors (water, UV)
  • salt fumes, industrial gases, solvents, liquid fuels, brine, etc.
• quick drying

Due to the content of anti-corrosion and metallic pigments, the paint coating well protects iron alloys against corrosion.

Preparing the substrate for painting with Lowigraf-Pur Structural primer enamel

Surfaces to be painted should be dry, clean, free of oil and other contaminants.

Steel and cast iron

Subject to abrasive blasting until the purity level is Sa 2 1/2 according to PN -ISO 8501-1:1996 and the roughness is Rz = 25 ÷ 70 μm. In case of small surfaces, manual cleaning and cleaning with mechanical tools up to St 2 is allowed. Paint the cleaned surface within a period not longer than 6 hours. from cleaning to prevent flash rust. Paint with Lowigraf-Pur polyurethane enamel on metal directly (without priming) or after priming with epoxy paint Feg-C.

Galvanized steel and non-ferrous metals

Clean from corrosion products, degrease with a 2-3% aqueous solution of degreasing agent Emulsol-RN1 and rinse with clean water. Smooth, shiny surfaces should be slightly matt. After cleaning and removing dust, the substrate can be painted with Lowigraf-Pur enamel directly (without priming).

Mineral substrates (e.g. plaster and concrete) as well as wooden and wood-based substrates

Paint directly with Lowigraf-Pur enamel (plaster and concrete only after complete hardening).

Renovation painting

In the case of renovation painting, it is recommended to wash the structure with high-pressure water. Depending on the degree of destruction of the old paint coating, the substrate should be cleaned by abrasive blasting to a purity of Sa 2 1/2 on the entire renovated surface or only in corroded places. Local cleaning is allowed by hand and with power-driven tools to a cleanliness level of PSt 2. Paint the cleaned surface directly with Lowigraf-Pur enamel. Lowigraf-Pur Structural is a two-component paint (the price is for the set, i.e. the base with the hardener).