FEG-C epoxy primer

Feg-C epoxy primer is an anti-corrosion epoxy paint for thick-layer protection of steel structures, including galvanized ones. It can be applied in layers up to 250 µm thick. Feg-C paint can be used alone (indoors) or in a set with polyvinyl, acrylic-polyvinyl, polyurethane and epoxy surface products. Feg-C paint is certified by the National Institute of Hygiene , according to which it is intended for professional anti-corrosion protection of steel structures, including galvanized ones, in industry (excluding internal surfaces in the food and pharmaceutical industries) and in construction inside buildings.

Feg-C paint coating is:

• smooth, semi-matte
• hard
• good adhesion, covering
• anti-corrosion

Feg-C epoxy primer is resistant to the following factors:

• chemical (solvents, liquid fuels, oils, water),
• mechanical,
• corrosive,
• temperature from -20ºC to +130ºC

The surface to be painted should be degreased (e.g. with Emulsol RN-1 ), clean and dry. Raw substrate - unpainted - surface preparation level: at least Sa 21/2, according to PN-ISO 8501-1:1996 (mill scale, rust and foreign contaminants removed). Renovation painting - wash the coating thoroughly with water under pressure, preferably using surfactants. Degree of surface preparation: at least PSa 2 1/2, permissible PSt 2 - according to PN-ISO 8501-2: 1998 (strongly adhering varnish coating not removed, mill scale removed, rust, poorly adhesive varnish coatings and foreign contaminants removed). Paint the cleaned surface within 6 hours to prevent flash rust. Top-Kor rust remover 12 hours before painting. Feg-C is a two-component paint (the price is for the set, i.e. base with hardener).